Pioneer S-EV500V Manuel d'utilisateur télécharger pdf (Page 54)

Additional information15

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is

something wrong with this component, check the points below. Sometimes the trouble may lie in

another component. Investigate the other components and electrical appliances being used. If the

trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer

authorized service center or your dealer to carry out repair work.

• If the unit does not operate normally due to external effects such as static electricity

disconnect the power plug from the outlet and insert again to return to normal operating

conditions.

General

Problem

Remedy

The power does not turn on. • Connect the power plug to the wall outlet.

• Disconnect the power plug from the outlet, and insert again.

• Make sure the power source is the right voltage for the AC inlet.

The power suddenly switches off

automatically and won’t switch

back on for a minute or so. Also,

the timer indicator is blinking.

• If the speaker cables aren’t connected properly, the system has a

safety feature that shuts the power off automatically. Check the

speaker wires to make sure they’re connected properly. If there

appears to be nothing wrong, try switching the power back on after

the timer indicator has been blinking for a minute or so.

• If you can’t seem to switch the power back on after the timer

indicator has been blinking for over a minute, the unit may be

malfunctioning. Take it to your nearest Pioneer authorized service

center or your dealer to carry out repair work.

No sound is output when a

function is selected.

• If you’re using the

LINE

input, make sure the component is

connected correctly (see

Connecting auxiliary components

page 12).

• Press

MUTE

on the remote control to turn muting off.

• Adjust the volume.

No image is output when

watching discs.

• Make sure the TV is connected correctly (see

Connecting to your

on page 11).

System does not output digital

audio at 96kHz.

• As a copy-protection measure, some DVDs do not output 96kHz

audio. In this case, even if 96 kHz is selected, the player

automatically outputs the audio at 48 kHz. This is not a

malfunction.

Can’t operate the remote control. • Replace the batteries (see

Loading the batteries

on page 6).

• Operate within 23 feet (7 m), 30° of the remote sensor on the front

panel (see

Range of the remote control unit

on page 6).

• Remove the obstacle or operate from another position.

• Avoid exposing the remote sensor on the front panel to direct

light.

EV-500-1000.book 54 ページ２００５年４月５日　火曜日　午後１２時３１分

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 62 63

Commentaires sur ces manuels

Pas de commentaire

Pioneer S-EV500V Manuel d'utilisateur Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Jeux de cassettes Pioneer S-EV500V