Pioneer VSX-819H-S Manuel d'utilisateur télécharger pdf (Page 44)

The System Setup menu06

2 Select a setup option.

• Manual – Move the test tone manually

from speaker to speaker and adjust

individual channel levels.

• Auto – Adjust channel levels as the test

tone moves from speaker to speaker

automatically.

3 Confirm your selected setup option.

The test tones will start after you press ENTER.

After the volume increases to the reference

level, test tones will be output.

4 Adjust the level of each channel using

/.

If you selected Manual, use / to switch

speakers. The Auto setup will output test tones

in the order shown on-screen:

Adjust the level of each speaker as the test tone

is emitted.

5 When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

Tip

• You can change the channel levels at any

time by press RECEIVER, then press CH

SELECT and +/– on the remote control. You

can also press CH SELECT and use / to

select the channel, and then use / to

adjust the channel levels.

Speaker Distance

For good sound depth and separation from

your system, you need to specify the distance

of your speakers from the listening position.

The receiver can then add the proper delay

needed for effective surround sound.

1 Select ‘Speaker Distance’ from the

Manual SP Setup menu.

2 Adjust the distance of each speaker

using /.

You can adjust the distance of each speaker in

0.1 m increments.

3 When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

The Input Assign menu

You only need to make settings in the Input

Assign menu if you have connected equipment

using component video cables.

•Default settings:

Component 1 – BD

Component 2 – TV

If your comp onent is connected via a

component video cable to an input terminal

other than the default, you must tell the

receiver which input terminal your component

is connected to, or else you may see the

composite video input instead of the

component video signal. For more on this, see

Using the component video jacks on page 18.

Note

1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level

of each speaker to 75 dB SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

2c.Channel Level

Test Tone [ Manual ]

Please Wait . . .20

Caution

Loud test tones

will be output.

 Return

2c.Channel Level

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 0dB]

[ ––– ]

[ 0dB]

0dB

2.Manual SP Setup

Return

a.Speaker Setting

b.Crossover Network

c.Channel Level

d.Speaker Distance

2d.Speaker Distance

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

3.0 m

[ 3.0 m ]

[ –––– ]

[ 3.0 m ]

VSX-819H_MYS.book 44 ページ２００９年１月１６日　金曜日　午後８時３４分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 211 212

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-819H-S Manuel d'utilisateur Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX-819H-S