Pioneer VSX-2021 Manuel d'utilisateur télécharger pdf (Page 56)

10 Controlling the rest of your system

3. Transmit a sequence of up to five pro-

grammed commands.

Similar to Multi operations, System off allows

you to use two buttons to stop and switch off

a series of components in your system at the

same time. Only one System off operation

sequence may be programmed.

Press MULTI OPERATION and then u SOURCE

to:

1. Transmit a sequence of up to five pro-

grammed commands.

2. Switch off all Pioneer devices including the

receiver (except DVD recorders and VCRs).

For greater convenience, program this receiver

to perform power on/off and playback opera-

tions on non-Pioneer devices as well. (The

signals for Pioneer devices described above

are not contingent on programming for non-

Pioneer devices.)

The buttons that can be programmed using

Multi operation or System off are the same but-

tons as those that can be programmed for other

remote controls (see Programming signals from

other remote controls on page 55 ).

Note

! Before Multi operation and System off will

work correctly, you must setup the remote to

work with your TV and other components (see

Setting the remote to control other components

on page 54 for more on this).

! Some units may take some time to power up,

in which case multiple operations may not be

possible.

! Power on and off commands only work with

components that have a standby mode.

! Some remote controllers for other

manufacturers’ devices use the same signals

for switching the power on and off. In some

cases, even if this receiver is programmed to

perform these commands, power to the non-

Pioneer devices may not be switched on and

off correctly. Program the receiver to perform

these commands if the non-Pioneer device

uses separate signals for power on/off.

Programming a multi-operation

or a shutdown sequence

1 Press and hold RCU SETUP, then press

‘3’ for three seconds.

Release the button after the LED flashes once.

The LED continues to flash.

! To cancel the preset setup mode press

RCU SETUP.

2 Press the input function button (or u

SOURCE button).

For Multi operations, press the input function

you wish to program (for example, if you want

to start the sequence by switching on your DVD

player, press DVD).

! With Multi operation, the HDMI and TV CTRL

settings cannot be made. For other settable

input functions, see Setting the remote to

control other components on page 54 .

For System off, press the u SOURCE button.

The LED blinks twice and flashes continuously.

3 If necessary, press the input function

button for the component whose

command you want to input.

This is only necessary if the command is for a

new component (input function).

4 Select the button for the command

you want to input.

The LED blinks once and flashes continuously.

! You don’t need to program the receiver to

switch on or off. This is done automatically.

With Pioneer components, you don’t need to

program the power to switch off in a shutdown

sequence (except DVD recorders).

you, for example, use the remote control to set

up and listen to a CD on the receiver, and then

use the remote control to rewind a tape in your

VCR while you continue to listen to your CD

player.

When direct function is on, any component you

select (using the input function buttons) will be

selected by both the receiver and the remote

control. When you turn direct function off, you

can operate the remote control without affect-

ing the receiver.

1 Press and hold RCU SETUP, then press

‘5’ for three seconds.

Release the button after the LED flashes once.

The LED continues to flash.

! To cancel the preset setup mode press

RCU SETUP.

2 Press the input function button for the

component you want to control.

3 Press ‘1’ (On) or ‘0’ (Off) to switch the

direct function mode.

If the LED lights for one second and continues

to flash, the setting has been successfully

completed.

If the LED flashes three times, the setting has

failed.

4 Press RCU SETUP to exit the setup.

Setting the backlight mode

! Default setting: 1 (normal mode)

The backlight lighting pattern can be selected

from among four modes, in consideration of

convenience and battery service life.

1 Press and hold RCU SETUP, then press

‘6’ for three seconds.

Release the button after the LED flashes once.

The LED continues to flash.

! To cancel the preset setup mode press

RCU SETUP.

2 Press the number button for the

backlight mode you want to set.

! ‘1’ (normal mode) – The backlight is turned

on and off with the light button. After it lights,

it turns off automatically if no operation is

performed for 10 seconds.

! ‘2’ (frequent lighting mode) – The backlight

turns on when any button on the remote

control is pressed. It is turned off with

the light button. After it lights, it turns off

automatically if no operation is performed for

10 seconds.

! ‘3’ (eco mode) – The backlight is turned on

and off with the light button. After it lights,

it turns off automatically if no operation is

performed for 5 seconds.

! ‘4’ (off mode) – The backlight does not turn

on even when the light button is pressed.

If the LED lights for one second and continues

to flash, the setting has been successfully

completed.

If the LED flashes three times, the setting has

failed.

3 Press RCU SETUP to exit the setup.

Multi Operation and System

Off

The Multi operation feature allows you to

program a series of up to 5 commands for the

components in your system.

! Be sure to call up the preset codes of devices

or perform programming signals for other

remote controls before multi operation

memory programming (page 55).

The Multi operation feature makes it easy to

perform the following operations by pressing

just two buttons.

Press MULTI OPERATION and then the DVD

input function button to:

1. Switch this receiver on.

2. Switch this receiver’s input to DVD.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-2021 Manuel d'utilisateur Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-2021