Pioneer VSX-2021 Manuel d'utilisateur télécharger pdf (Page 48)

09 Using other functions

Setting What it does Option(s)

BASS

<a>

Adjusts the amount of bass.

c –6 to +6 (dB) d

Default: 0 (dB)

TREBLE

<a>

Adjusts the amount of treble.

c –6 to +6 (dB) d

Default: 0 (dB)

S.RTRV

(Auto Sound Retriever)

<b>

With the Auto Sound Retriever function, DSP processing

is used to compensate for the loss of audio data upon

compression, improving the sound’s sense of density

and modulation.

When ON is selected, the Sound Retriever effect is

optimized based on the bitrate information of the con-

tents input to the USB memory audio and HOME MEDIA

GALLERY (digital audio input only) to achieve high sound

quality.

OFF

DNR

(Digital Noise Reduc-

tion)

May improve the quality of sound in a noisy source (for

example, video tape with lots of background noise) when

switched on.

This only has an effect with 2-channel signal inputs.

OFF

DIALOG E

(Dialog Enhancement)

<c>

Localizes dialog in the center channel to make it stand

out from other background sounds in a TV or movie

soundtrack. By moving from UP1 through UP2 and UP3

up to UP4, you can make the sound source seem to

relocate upwards.

c OFF/FLAT/UP1/UP2/UP3/

UP4 d

Default: OFF

DUAL

(Dual Mono)

Specifies how dual mono encoded Dolby Digital

soundtracks should be played. Dual mono is not widely

used, but is sometimes necessary when two languages

need to be sent to separate channels.

CH1 – Channel 1 is heard

only

CH2 – Channel 2 is heard

only

CH1 CH2 – Both channels

heard from front speakers

Fixed PCM

This is useful if you find there is a slight delay before OFF

recognizes the PCM signal on a CD, for instance.

When ON is selected, noise may be output during play-

back of non-PCM sources. Please select another input

signal if this is a problem.

OFF

DRC

(Dynamic Range

Control)

<d>

Adjusts the level of dynamic range for movie soundtracks

optimized for Dolby Digital, DTS, Dolby Digital Plus,

Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you

may need to use this feature when listening to surround

sound at low volumes).

AUTO

MAX

MID

OFF

Using other functions

Setting the Audio options

There are a number of additional sound settings you can make using the AUDIO PARAMETER

menu. The defaults, if not stated, are listed in bold.

Important

! Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the

current source, settings and status of the receiver.

1 Press to the receiver operation mode, then press AUDIO PARAMETER.

2 Use i/j to select the setting you want to adjust.

Depending on the current status/mode of the receiver, certain options may not be able to be

selected. Check the table below for notes on this.

3 Use k/l to set as necessary.

See the table below for the options available for each setting.

4 Press RETURN to confirm and exit the menu.

Audio parameter menu

Setting What it does Option(s)

MCACC

(MCACC preset)

Selects your favorite MCACC preset memory when mul-

tiple preset memories are saved. When an MCACC preset

memory has been renamed, the given name is displayed.

c M1. MEMORY 1 to M6.

MEMORY 6 d

Default: M1. MEMORY 1

(Acoustic Calibration

EQ)

Switches on/off the effects of EQ Pro.

OFF

S-WAVE

(Standing Wave)

Switches on/off the effects of Standing Wave Control.

OFF

Phase C+

(Phase Control Plus)

For discs created with standards other than Phase Con-

trol, the LFE channel is delayed upon recording in the

first place. This function corrects for phase shifting on

such discs.

c 0 to 16 (ms) d

Default: 6ms

DELAY

(Sound Delay)

Some monitors have a slight delay when showing video,

so the soundtrack will be slightly out of sync with the pic-

ture. By adding a bit of delay, you can adjust the sound to

match the presentation of the video.

c 0.0 to 10.0 (frames) d

1 second = 25 frames (PAL)

Default: 0.0

TONE

(Tone Control)

Applies the treble and bass tone controls to a source, or

bypasses them completely.

BYPASS

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-2021 Manuel d'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-2021