Pioneer PDP 427CMX Manuel d'utilisateur télécharger pdf (Page 67)

[427CMX]

Special Installation (Place product upright and flush, embedded in the wall)

X (Front of the unit)

✩ Operating Temperature Restrictions

(*1, *2)

Temperature in space X and Y

A: 0 mm to 370 mm 0 °C to 40 °C

Y (Rear of the unit)

3.6.7 Place product upright and flush into wall (embedding in the wall)

Carefully read the following instructions before trying to embed the unit in a wall. Observe all the limitations specified

below.

Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.

(1) Embedding in walls with space provided behind the unit (with no obstructions within a distance of 300 mm

from the back surface of the unit)

For this installation, set the ‘FAN CONTROL’ to ‘MAX’ as shown in “5.4.3 Adjustment and Setting in the Integrator Mode 14)

Cooling Fan Control Setting” (pg. 235).

When INPUT2 has been selected, use input compatible signal up to 1280x1024 (60 Hz) at ambient temperature condition of

0 °C to 35 °C.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 287 288

Pas de commentaire

Pioneer PDP 427CMX Manuel d'utilisateur Page 67