Pioneer VSX-515-S/-K Manuel d'utilisateur télécharger pdf (Page 53)

The System Setup menu

English

Français

Deutsch

Nederlands

Italiano

Español

3 Confirm your selected setup option.

The test tones will start after you press

ENTER

4 Adjust the level of each channel using the

/

(cursor up/down) buttons.

If you selected

T. TONE M.

, use

/

(cursor

left/right) to switch speakers.

The

T. TONE A.

setup will output test tones in

the following order (depending on the speaker

setting):

Adjust the level of each speaker as the test

tone is emitted.

5 When you’re finished, press RETURN.

Tip

• You can change the channel levels at any

time by using

EFFECT/CH SEL

and

+/–

the remote control. You can set two

channel levels: one for

DVD 5.1 CH

and

one for the listening modes.

Speaker Distance

For good sound depth and separation from

your system, you need to specify the distance

of your speakers from the listening position.

The receiver can then add the proper delay

needed for effective surround sound.

1 Select ‘SP DISTN.’ from the SP SETUP

menu.

2 Use

/

(cursor left/right) to choose the

speaker that you want then set the distance.

Use

/

(cursor up/down) to adjust the

distance of each speaker (in 0.1 meter

increments).

3 When you’re finished, press RETURN.

Note

1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level

of each speaker to 75 dB SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

SBR

SW SBL

VSX_815-915.book.fm 53 ページ２００５年３月１日　火曜日　午前１０時２２分

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-515-S/-K Manuel d'utilisateur Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX-515-S/-K