Pioneer VSX-515-S/-K Manuel d'utilisateur télécharger pdf (Page 48)

The System Setup menu07

48

En

Fine Channel Level

• Default setting:

0dB

(all channels)

You can achieve better surround sound by

properly adjusting the overall balance of your

speaker system. The following setting can help

you make detailed adjustments that you may

not achieve using the

Quick surround sound

setup

on page 11.

1 Select ‘

CH LEVEL’

from the Manual

MCACC setup menu.

You’ll hear test tones from each speaker in

turn. Since the left speaker is the main

reference speaker, the level is fixed and cannot

be changed.

Caution

• The test tones used in the System Setup

are output at high volume (the volume

increases to

-18dB

automatically).

2 Use

/

(cursor left/right) to select each

channel in turn and adjust the levels

(

+/–

10dB

)

as necessary.

Use

/

(cursor up/down) to adjust the

volume of the selected speaker to match the

reference speaker. When it sounds like both

tones are the same volume, press



(cursor

left) to continue to the next channel.

• For comparison purposes, the reference

speaker will change depending on which

speaker you select.

• If you want to go back and adjust a

channel, simply use

/

(cursor left/

right) to select it.

3 When you're finished, press RETURN.

You will return to the Manual MCACC setup

menu.

Fine Channel Distance

• Default setting:

3.0 m

(all channels)

For proper sound depth and separation with

your system, it is necessary to add a slight bit

of delay to some speakers so that all sounds

will arrive at the listening position at the same

time. The following setting can help you make

detailed adjustments that you may not achieve

using the

Quick surround sound setup

on

page 11.

1 Select ‘CH DISTN.’ from the Manual

MCACC setup menu.

2 Use

/

(cursor up/down) to adjust the

distance of the left channel from the listening

position then press

ENTER

.

3 Use

/

(cursor left/right) to select each

channel in turn and adjust the distance as

necessary.

Use

/

(cursor up/down) to adjust the delay

of the selected speaker to match the reference

speaker. The delay is measured in terms of

speaker distance from

0.1

to

9.0

meters.

Listen to the reference speaker and use it to

measure the target channel. From the listening

position, face the two speakers with your arms

outstretched pointing at each speaker. Try to

make the two tones sound as if they are

arriving simultaneously at a position slightly in

front of you and between your arm span.

When it sounds like the delay settings are

matched up, press



(cursor right) to confirm

and continue to the next channel.

• For comparison purposes, the reference

speaker will change depending on which

speaker you select.

VSX_815-915.book.fm 48 ページ２００５年３月１日　火曜日　午前１０時２２分

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

Commentaires sur ces manuels

Pas de commentaire