Pioneer XDV-P6 Manuel d'utilisateur télécharger pdf (Page 41)

Important

If the setting is incorrect there will be no sound

so be sure to read the manuals of the connected

components.

1 Move the joystick up or down to select

OUTPUT SELECTION in the GEN.

OUTPUT SELECTION is highlighted.

2 Click the joystick.

Audio output setting menu is displayed.

3 Move the joystick up or down to select

the desired audio output setting.

The currently set audio output setting is indi-

cated with blue box. The digital output setting

selected with the joystick is highlighted.

! 48KHz – A 48 kHz signal is output regard-

less of the audio sampling frequency. A 96

kHz signal is converted to a 48 kHz signal.

(initial setting)

! 96KHz – The signal is output with the same

frequency as the audio sampling frequency.

With a 96kHz signal, you can enjoy excep-

tionally high sound quality.

4 Click the joystick.

The selected audio output setting is set.

Notes

! With discs featuring 96 kHz recording, if you

select 96KHz, audio is not output from digital

output.

! With discs that do not feature a CSS (Content

Scrambling System) copy guard signal, a 96

kHz digital signal is output.

! When using this unit with a Pioneer multi-

channel processor (DEQ-P8000), select

48KHz. If you select 96KHz, no sound will be

output when playing discs featuring 96 kHz re-

cordings.

Setting up the DVD player

Section

Setting up the DVD player

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Pas de commentaire

Pioneer XDV-P6 Manuel d'utilisateur Page 41