Pioneer XC-HM70-K Manuel d'utilisateur télécharger pdf (Page 10)

Connecting your equipment

Connecting to the network through LAN

interface

By connecting this receiver to the network via the LAN

terminal, you can listen to Internet radio stations. To listen to

Internet radio stations, you must sign a contract with an ISP

(Internet Service Provider) beforehand.

When connected in this way, you can play audio files stored

on the components on the network, including your computer,

using NETWORK functions.

Connect the LAN terminal on this receiver to the LAN

terminal on your router (with or without the built-in DHCP

server function) with a straight LAN cable (CAT 5 or higher).

Turn on the DHCP server function of your router. In case your

router does not have the built-in DHCP server function, it is

necessary to set up the network manually. For details, see

Network setup menu on page 21.

Note

• Refer to the operation manual of the equipment you have

as the connected equipment and connection method

may differ depending on your Internet environment.

• When using a broadband Internet connection, a contract

with an Internet service provider is required. For more

details, contact your nearest Internet service provider.

Connecting to a wireless LAN

Wireless connection to the network is possible through a

wireless LAN connection. Use the separately sold AS-WL300

for connection.

For details, refer to the operating instructions of the wireless

LAN converter (AS-WL300).

AC power connection

After checking all the connections have been made correctly,

plug the AC power lead of this unit into the wall socket.

CAUTION

• Unplug the AC power lead from the wall socket if the unit

will not be in use for a prolonged period of time.

• Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power cord

when your hands are wet as this could cause a short

circuit or electric shock. Do not place the unit, a piece of

furniture, etc., on the power cord, or pinch the cord. Never

make a knot in the cord or tie it with other cords. The

power cords should be routed such that they are not likely

to be stepped on. A damaged power cord can cause a fire

or give you an electrical shock. Check the power cord

once in a while. When you find it damaged, ask your

nearest PIONEER authorized service center or your dealer

for a replacement.

DC OUTPUT

for WIRELESS LAN

(OUTPUT 5 V

0.6 A MAX)

LAN

(

10/100

)

UNBAL

SPEAKERS

LOOP

ANTENNA

WAN

321

LAN

to LAN port

LAN cable

(sold separately)

Router

Modem

Internet

DC OUTPUT

for WIRELESS LAN

(OUTPUT 5 V

0.6 A MAX)

LAN

(

10/100

)

UNBAL

SPEAKERS

LOOP

ANTENNA

DC 5V WPS

Ethernet

WAN

Internet

Modem

Router

Wireless LAN converter (AS-WL300)

X-HM70_En.fm 10 ページ２０１１年８月２日　火曜日　午後４時４６分

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 223 224

Commentaires sur ces manuels

Pas de commentaire

Pioneer XC-HM70-K Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer XC-HM70-K