Pioneer SC-LX57-S Manuel d'utilisateur Page 49
- Page / 134
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
49
05
Basic playback
Playing a source
Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.
STANDBY/ON
iPod
USB CBL
SATTUNERMHL
ADPT
CDTV
BDR
BD DVDDVR
NET
HDMI
VOLUME
INPUT
SELECT
RECEIVER
AUTO/ALC/
DIRECT
STANDARDADV SURR
RECEIVER
1 Switch on your system components and receiver.
Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have
one), then the receiver (press u STANDBY/ON).
Make sure that the TV’s video input is set to this receiver.
2 Select the input function you want to play.
You can use the input function buttons on the remote control, INPUT SELECT, or the front panel
INPUT SELECTOR dial.
! If you need to manually switch the input signal type press SIGNAL SEL (page 60).
3 Press to the receiver operation mode.
4 Press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select ‘AUTO SURROUND’
and start playback of the source.
For such sound sources as Dolby TrueHD and DTS-HD, the surround sound is played. With stereo sound, the
sound is played from the left and right front speakers with the default listening mode.
! You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It
should be set to output Dolby Digital, DTS and 88.2 kHz / 96 kHz PCM (2 channel) audio, and if there is an
MPEG audio option, set this to convert the MPEG audio to PCM.
! See also Listening to your system on page 57 for information on different ways of listening to sources.
It is possible to check on the front panel display whether or not multi-channel playback is being performed prop-
erly. For details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 119.
When multi-channel speakers (more than the two front left and right channels) are connected, straight decoding
is performed, so the input signal’s format name (for example, 2 TrueHD, DTS-HD MSTR or DTS-HD HI RES) is
displayed.
If the display does not correspond to the input signal and listening mode, check the connections and settings.
5 Use the VOLUME +/– to adjust the volume level.
Turn down the volume of your TV so that all sound is coming from the speakers connected to this receiver.
Note
Depending on the input to be played, the playback operation can in some cases be performed using the on-
screen display.
The on-screen display is only displayed when this receiver’s HDMI OUT 1 or HDMI OUT 2 terminal is connected
to the TV’s HDMI input terminal by HDMI cable. When connected to the TV with anything other than an HDMI
cable, watch the front panel display when performing operations and making settings.
Turning off the sound
Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).
% Press MUTE.
Playing a source with HDMI connection
% Use INPUT SELECT to select the input function connected to the receiver’s HDMI input
terminals.
You can also perform the same operation by using the INPUT SELECTOR dial on the front panel or by pressing
HDMI on the remote control repeatedly.
! Set the HDMI parameter in Setting the Audio options on page 73 to THROUGH if you want to hear HDMI audio
output from your TV (no sound will be heard from this receiver).
! If the video signal does not appear on your TV, try adjusting the resolution settings on your component or dis-
play. Note that some components (such as video game units) have resolutions that may not be converted. In
this case, use an analog video connection.
Input Volume Absorber
This can be used to correct for the difference in volume between input sources.
1 Switch to the input whose volume you want to adjust.
2 Press
to the receiver operation mode.
3 Press CH LEVEL.
4 Use i/j to select ‘ALL’.
5 Adjust the volume using k/l.
The volume can be adjusted in the range of -12.0dB to +12.0dB, 0.5 dB steps.
6 When you’re finished, press RETURN.
- SC-LX57-K/-S 1
- K058a_A1_En 2
- Contents 3
- 11 The Advanced MCACC menu 4
- 14 Additional information 4
- Important 5
- Our philosophy 7
- Features 7
- Checking what’s in the box 7
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Controls and displays 11
- Front panel 15
- Connecting your equipment 16
- Rear panel 17
- Placing the speakers 21
- Connecting the speakers 21
- Bi-amp compatible speaker 24
- Front right 24
- Front left 24
- Video signals 28
- Select one 30
- HDMI/DVI-compatible monitor 30
- DVD player, etc 30
- CD player, MD, DAT, etc 34
- 75 Ω coaxial cable 35
- Outdoor antenna 35
- Indoor antenna 35
- (vinyl-coated wire) 35
- 5 m to 6 m 35
- AUDIO INLINE LEVEL 36
- VIDEO IN 36
- Sub zone (ZONE 2) Main zone 37
- Sub zone (ZONE 3) Main zone 37
- Bluetooth® ADAPTER 39
- Connecting a USB device 40
- Connecting to a wireless LAN 40
- Closet or shelving unit 41
- Non-Pioneer 41
- IR receiver 41
- Plugging in the receiver 42
- Basic Setup 43
- Microphone 44
- The Input Setup menu 45
- Operation Mode Setup 46
- About the Home Menu 47
- Basic playback 48
- AUTO/ALC/ 49
- DIRECT 49
- STANDARDADV SURR 49
- Playing an iPod 50
- ENTER, d 51
- Listening to the radio 53
- Listening to your system 57
- Selecting MCACC presets 60
- Choosing the input signal 60
- Introduction 63
- About HTC Connect 64
- Basic playback controls 64
- About network playback 66
- About playable file formats 67
- Control with HDMI function 68
- HDMI Setup 69
- Before using synchronization 70
- About synchronized operations 70
- Setting the PQLS function 70
- Using other functions 72
- Setting the Audio options 73
- Setting the Video options 75
- Using the MULTI-ZONE controls 77
- Using the sleep timer 79
- Dimming the display 79
- Switching the HDMI output 79
- Checking your system settings 79
- Resetting the system 80
- ALL ZONE STBY 82
- DISCRETE ON 82
- This receiver’s 83
- Other remote 83
- Direct function 84
- Setting the backlight mode 84
- (Discrete On) functions 84
- Controlling components 85
- TV and Audio/Video components 86
- Audio/Video components 86
- TV (Projector) 87
- The Advanced MCACC menu 88
- Automatic MCACC (Expert) 89
- Manual MCACC setup 91
- Checking MCACC Data 93
- Data Management 94
- Manual speaker setup 97
- Speaker Setting 98
- Channel Level 98
- Speaker Distance 99
- THX Audio Setting 99
- Network Setup menu 100
- The Other Setup menu 101
- Volume Setup 102
- Remote Control Mode Setup 102
- Software Update 102
- Play ZONE Setup 103
- ZONE Setup 103
- On Screen Display Setup 103
- MHL Setup 104
- Troubleshooting 107
- No sound 107
- Other audio problems 108
- ADAPTER PORT terminal 109
- Settings 109
- Remote control 110
- Symptoms Remedies 111
- AVNavigator 112
- USB interface 112
- Symptoms Causes Remedies 113
- Web Control 114
- Wireless LAN 114
- Additional information 115
- Surround sound formats 116
- About THX 116
- About HDMI 117
- HTC Connect 117
- About iPod 118
- Windows 8 118
- Software license notice 118
- Speaker Setting Guide 119
- Cleaning the unit 121
- 1999/5/EC 123
- Glossary 124
- Features index 127
- Specifications 128
- Preset code list 129
- © 2013 PIONEER CORPORATION 134
- All rights reserved 134
- <ARB7505-A> 134
Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer SC-LX57-S
(54 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.743 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels