Pioneer KRP-600A Manuel d'utilisateur télécharger pdf (Page 64)

Useful adjustment settings11

Note

•Pressing

TOOLS

also causes the “Sleep” menu to appear.

• Five minutes before the selected time elapses, the remaining

time appears every minute.

• When the sleep timer has been set, “Remain ---min” appears at

the top of the menu.

Using a password

The flat screen TV provides the Channel Lock function for preventing

children from watching inappropriate programmes. You need to

enter a password when watching programmes with “Block”

specified. Before the system is shipped, “1234” is preset as the

factory-default password. You can however, change the password

as you want.

You will need to enter the password before using the “Auto

Installation”, “Analogue TV Setup”, “Installation”, “Channel

management” or “Password” functions from the HOME MENU.

This is to prevent unauthorized changes to the settings.

Entering a password

You will need to enter the password after selecting a channel

blocked with the Channel Lock function, and before you can use

some of the menu functions.

• Enter your four-digit password using buttons 0 to 9.

Note

• If you fail to enter the correct password three times, “Invalid

password.” appears, and the menu is closed. In order to display

the password entry screen again to unlock the password, select

the blocked channel or open the menu again.

Changing the password

Use the following procedure to change the password.

1 Press HOME MENU.

2 Select “Setup“ (

/

then ENTER).

3 Select “System Setup” (

/

then ENTER).

4 Select “Password“ (

/

then ENTER).

The password entry screen appears. Enter the current four-digit

password using buttons 0 to 9.

5 Select “Change Password“ (

/

then ENTER).

6 Enter a four-digit password to be newly set, using buttons 0

to 9.

7 Enter the same password that you have entered in step 6.

If a different password is entered, the operation goes back to step 6

for reentry from the beginning.

You can try up to three times to reconfirm the new password before

the Change Password screen is automatically exited.

8 Press HOME MENU to exit the menu.

Note

• Take a note of the newly set password and keep it handy.

Disabling the password function

Use the following procedure if you want to deactivate the protection

function that prompts password entry. The factory default is

“Enable”.

1 Repeat steps 1 to 4 provided for

Changing the password

2 Select “Password Setting“ (

/

then ENTER).

3 Select “Disable“ (

/

then ENTER).

4 Press HOME MENU to exit the menu.

Note

• The above procedure will reset the password to the factory

default (1 2 3 4).

• After disabling the password function, you cannot change the

Channel Lock settings. See Setting Channel Lock on page 35.

• After disabling the password function, you cannot change or

reset the password.

• When you enable the password function again after disabling it,

the factory default password (1 2 3 4) is restored.

Please Input Your Password.

Password Setting : Enable

Change Password

We suggest you write down your password so you don’t forget it.

If you forget the password

When the message “Please Input Your Password.” is displayed,

press the ENTER button on the remote control unit and hold it

down for three seconds or longer.

The password reverts to “1234”.

KRP-600A/KRP-500A

Your password No.:

KRP-600A_500A.book Page 64 Monday, September 8, 2008 10:31 AM

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 344 345

Pioneer KRP-600A Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Pioneer KRP-600A Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer KRP-600A