Pioneer DEH-P6400R Manuel d'utilisateur télécharger pdf (Page 11)

Tuner

En

11

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on page 12.

This unit’s AF (alternative frequencies search)

function can be switched on and off. AF should

be off for normal tuning operation (refer to page

15).

1 STEREO (ST) indicator

Shows that the frequency selected is being

broadcast in stereo.

2 BAND indicator

Shows which band the radio is tuned to, MW,

LW or FM.

3 PRESET NUMBER indicator

Shows what preset has been selected.

4 FREQUENCY indicator

Shows to which frequency the tuner is

tuned.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

2 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

3 Press BAND/ESC to select a band.

Press BAND/ESC until the desired band is dis-

played, FM1, FM2, FM3 for FM or MW/LW.

4 To perform manual tuning, press

2 or 3

with quick presses.

The frequencies move up or down step by step.

5 To perform seek tuning, press and hold 2

or 3 for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

• You can cancel seek tuning by pressing either

2 or 3 with a quick press.

• If you press and hold 2 or 3 you can skip

broadcasting stations. Seek tuning starts as

soon as you release the buttons.

Note

• When the frequency selected is being broad-

cast in stereo the STEREO (ST) indicator will

light.

123

4

English

Español

Deutsch

Français

Italiano

Nederlands

03

Section

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 95 96

Commentaires sur ces manuels

Pas de commentaire