Pioneer DEH-P6400R Manuel d'utilisateur télécharger pdf (Page 35)

07

Section

Audio Adjustments

En

35

English

Español

Deutsch

Français

Italiano

Nederlands

Adjusting subwoofer settings

When the subwoofer output is on, you can

adjust the cut-off frequency and the output level

of the subwoofer.

1 Press AUDIO

to select the Sub-W2.

When the subwoofer output is on, you can

select the

Sub-W2. Press AUDIO until Sub-W2 80

(Hz) appears in the display.

• If the subwoofer setting has been previously

adjusted, the frequency of that previously

selected will be displayed, such as 50 (Hz) or 125

(Hz).

2 Press 2 or 3 to select cut-off frequency.

Press 2 and 50 (Hz) is displayed. Press 3 and

125 (Hz) is displayed. Only frequencies lower

than those in the selected range are output

from the subwoofer.

3 Press 5 or ∞ to adjust the output level of

the subwoofer.

Each press of 5 or ∞ increases or decreases

the level of the subwoofer (e.g., +6 to –6).

Press 5 or ∞ until you see the desired value

displayed.

Adjusting source levels

SLA (Source level adjustment) lets you adjust

the volume level of each source to prevent radi-

cal changes in volume when switching between

sources.

• Settings are based on the volume level of the

FM tuner, which remains unchanged.

1 Compare the FM tuner volume level with

the level of the source you wish to adjust (e.g.,

built-in CD player).

2 Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

3 Press 5 or ∞ to adjust the source volume.

Each press of 5 or ∞ increases or decreases

the source volume.

• SLA +4 – SLA –4 is displayed as the source

volume is increased or decreased.

Notes

• Since the FM tuner volume is the control, it is

not possible to apply source level adjustments

to the FM tuner.

• The MW/LW tuner volume level can also be

adjusted with source level adjustments.

• The built-in CD and the multi-CD players are

both set to the same source level adjustment

volume automatically.

• External unit 1 and External unit 2 are set to

the same volume adjustment setting automat-

ically.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 95 96

Commentaires sur ces manuels

Pas de commentaire