Pioneer VSX-LX70 Manuel d'utilisateur Page 77
- Page / 99
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Controlling the rest of your system
13
77
En
4 Point the two remote controls towards each other
then press the button that will be doing the learning on
this receiver’s remote control.
PRES KEY starts flashing to indicate the remote is ready
to accept a signal.
• The remote controls should be 3 cm to 5 cm apart.
5 Press the corresponding button on the other
remote control that is sending (teaching) the signal to
this receiver’s remote control.
For example, if you want to learn the playback control
signal, press and hold briefly. The LCD display will
show OK if the operation has been learned.
1
If for some reasons the operation hasn’t been learned the
LCD will display ERROR briefly and then display PRES
KEY again. If this happens, keep pressing the (teaching)
button as you vary the distance between the two remotes,
until the LCD display shows OK.
2
Certain buttons represent operations that cannot be
learned from other remote controls.
3
The buttons
available are shown below (with the exception of the TV
controls, a combination of SHIFT and these buttons can
also be learned):
6 To program additional signals for the current
component repeat steps 4 and 5.
To program signals for another component, exit and
repeat steps 1 through 5.
7 Press and hold the
RECEIVER
button for a couple of
seconds to exit and store the operation(s).
Erasing one of the remote control
button settings
This erases one of the buttons you have programmed and
restores the button to the factory default.
1 While pressing the
RECEIVER
button, press
SETUP
.
The remote LCD display shows SETUP.
2Use
/
to select
ERASE
then press
ENTER
.
The LCD on the remote prompts you for the component
corresponding to the button setting to be erased.
3 Press the input source button corresponding to the
command to be erased then press
ENTER
.
The LCD display flashes PRES KEY.
4 Press and hold the button to be erased for two
seconds.
The LCD display shows OK or NO CODE to confirm the
button has been erased.
5 Repeat step 4 to erase other buttons.
6 Press and hold the
RECEIVER
button for a couple of
seconds when you’re done.
Resetting the remote control presets
This will erase all preset remote control preset codes and
programmed buttons.
1 While pressing the
RECEIVER
button, press
SETUP
.
The remote LCD display shows SETUP.
2Use
/
to select
RESET
then press
ENTER
.
RESET flashes in the LCD display.
3 Press and hold
ENTER for about two seconds
.
The LCD shows OK to confirm the remote presets have
been erased.
Confirming preset codes
Use this feature to check which preset code is assigned
to an input source button.
1 While pressing the
RECEIVER
button, press
SETUP
.
The remote LCD display shows SETUP.
2Use
/
to select READ ID then press
ENTER
.
The LCD on the remote prompts you for the input source
button you want to check.
Note
1 Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong signal.
2 • Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be moved closer together or farther apart.
• If the remote LCD shows FULL, it means the memory is full. See Erasing one of the remote control button settings below to erase a programmed button
you’re not using to free up more memory (note that some signals may take more memory than others).
3 Note that the number key decimal button (+10/D.ACCESS) may not be learned with some components.
SLEEP
CLEAR
SR
+
ANALOG
ATT
DISC
DIMMER
CLASS
D.ACCESS
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
DVD TV
BD TV CTRL
DVR1 i Pod
TUNER
RECEIVER
CD
DVR2
HOME MEDIA
GALLERY
CD-R
ZONE2/3
GENRE
HDMI
3 cm to 5 cm
SLEEP
CLEAR
+
10
SR
+
ANALOG
ATT
DISC
DIMMER
CLASS
D.ACCESS
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
ENTER
TV CONTROL
DVD TV
BD TV CTRL
DVR1
TUNE
TUNE
ST ST
i Pod
TUNER
RECEIVER
ENTER
A PARAMETER
TOP MENU
V PARAMETER
MENU T.EDIT
BAND
PROGRAM
GUIDE
RETURN
SETUP
PTY SEARCH
CD
DVR2
HOME MEDIA
GALLERY
CD-R
ZONE2/3
CH
LEVEL
GENRE
HDMI
TV CONTROL
VOL
STATUS
SIGNAL SEL
T.DISP
SBch
STEREO/
F.S.SURR
JUKEBOX
TV CH
INPUT
SELECT
MPX
AUDIO SUBTITLE
INFO
MUTE
REC
TV VOL
REC STOP
HDD
CH
CH
DVD
PTY
SEARCH
DISP
PHOTO
TV/DTV
EON
A
BCDE
VSX_LX60LX70.book Page 77 Wednesday, June 6, 2007 3:13 PM
- Operating Instructions 1
- IMPORTANT 2
- Operating Environment 3
- Contents 4
- Before you start 6
- Control) 8
- Playing a source 9
- 5 minute guide 10
- Full Band Phase Control 10
- Connecting your equipment 12
- When making cable connections 13
- About the video converter 13
- DIGITAL OUT 15
- VIDEO S-VIDEOAUDIORL 15
- Connecting antennas 21
- Plugging in the receiver 22
- AC outlet 22
- Controls and displays 23
- Remote control 26
- Listening to your system 28
- Listening in stereo 30
- Using Stream Direct 30
- Selecting MCACC presets 31
- Choosing the input signal 31
- USB playback 34
- Using the tuner 36
- Chapter 7: 36
- Listening to the radio 36
- Saving station presets 36
- An introduction to RDS 37
- Using EON 38
- The System Setup menu 39
- Surround back speaker setting 42
- Manual MCACC setup 42
- Data Management 48
- Manual speaker setup 50
- Other connections 53
- Connecting using HDMI 54
- About HDMI 55
- Speaker B setup 56
- Front left 57
- Making MULTI-ZONE connections 58
- CONTROL ON/OFF 60
- MULTI – ZONE & 60
- SOURCE/REC SEL 60
- Pioneer plasma 61
- HDMI Control 64
- Setting the HDMI Control mode 65
- Other Settings 66
- The Other Setup menu 67
- Using other functions 70
- Setting the Video options 71
- 30 min 60 min 73
- Checking your system settings 74
- Resetting the system 74
- RECEIVER SOURCE 76
- TV CONTROL 76
- 3 cm to 5 cm 77
- Renaming input source names 78
- Direct function 78
- Controls for TVs 79
- Controls for other components 80
- ASSIGNABLE 81
- Additional information 82
- Surround sound formats 89
- About THX 90
- About Neural Surround 91
- Specifications 96
- Cleaning the unit 97
- Our philosophy 97
- PIONEER CORPORATION 99
Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX-LX70
(73 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.869 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels