Pioneer VSA-AX10Ai-S Manuel d'utilisateur télécharger pdf (Page 60)

The Surround Setup menu

Use the / (cursor left/right) hard keys to adjust the

setting. The X-Curve is expressed as a downwards slope

in decibels per octave, starting at 2kHz. The sound

becomes less bright as the slope increases (to a

maximum of -3.0dB/oct). Use the following guidelines to

set the X-Curve according to your room size:

5 Select ‘Return’ then press ENTER to finish.

Note

• Since the principal is the same, X-Curve isn’t applied

when you’re using any of the Home THX modes (see

Using the Home THX modes on page 41).

Checking your surround settings

You can check through the amplifier settings screen by

screen after you’re finished using the Surround Setup.

1 Select ‘Check’ from the Surround Setup menu

and press ENTER.

2 Use the / (cursor left/right) hard keys to

cycle through the settings screen by screen.

These appear in the same order as the Surround Setup

menu. Select Return then press ENTER to go back to the

Surround Setup menu.

Room size (m

)

≤≤

36 ≤≤

≤≤

48 ≤≤

≤≤

60 ≤≤

≤≤

72 ≤≤

≤≤

300

≤≤

1000

X-Curve (dB/oct)

–0.5 –1 –1.5 –2 –2.5 –3

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ]

[ 2.Channel Level ]

[ 3.Speaker Distance ]

[ 4.Acoustic Cal EQ ]

[ 5.X-Curve ]

[Return]

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSA-AX10Ai-S Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSA-AX10Ai-S