Pioneer Super Tuner III D AVH-P4950DVD Manuel d'utilisateur télécharger pdf (Page 21)

Tuner

Basic Operations

1

2

4

3

6

7

5

1 Source icon

2 Band indicator

3 Preset number indicator

4 Frequency indicator

5 Preset list display

6 LOCAL indicator

Shows when local seek tuning is on.

7 STEREO indicator

Shows when the selected frequency is being

broadcast in stereo.

1 Touch the source icon and then touch

TUNER to select the tuner.

2 Touch the screen to display the touch

panel keys.

3 Touch BAND to select a band.

Touch BAND until the desired band (FM1,

FM2, FM3 for FM or AM) is displayed.

4 To select a preset channel, touch a pre-

set channel on the list.

The preset channel you selected is tuned in.

# When the list of channels is not displayed,

touch LIST.

5 To perform manual tuning, briefly

touch c or d.

The frequencies move up or down step by

step.

6 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching

either c or d.

# If you keep touching c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the key.

Note

If you do not use the touch panel keys within 30

seconds, they will be hidden automatically.

Storing and recalling broadcast

frequencies

You can easily store up to six broadcast fre-

quencies for later recall.

! Up to 18 FM stations, six for each of the

three FM bands, and six AM stations can

be stored in memory.

% When you find a frequency that you

want to store in memory keep touching

one of preset tuning keys P1 to P6 until the

preset number stops flashing.

The number you have touched will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you touch the same preset tun-

ing key the radio station frequency is recalled

from memory.

# When the touch panel keys are not displayed,

you can display them by touching the screen.

Operating this unit

En

21

Section

03

Operating this unit

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 84 85

Commentaires sur ces manuels

Pas de commentaire