Pioneer Super Tuner III D AVH-P4950DVD Manuel d'utilisateur télécharger pdf (Page 65)

4 Touch c or d to adjust the speaker out-

put level.

Each time you touch c or d increases or de-

creases the speaker output level. +10 to –10 is

displayed as the level is increased or de-

creased.

# The test tone rotates to the next speaker after

about two seconds from the last operation.

5 Touch STOP to stop the test tone out-

put.

Notes

! You can also display the speaker output level

menu by pressing BOOST button.

! If needed, select speakers and adjust their ‘ab-

solute’ output levels. (Refer to Adjusting the

speaker output levels on the previous page.)

! To adjust the speaker output levels in this

mode is the same as making the speaker out-

put levels at SP LEVEL. Both provide the same

results.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGN.

3 Touch any of the following touch panel

keys to select the time alignment.

! INIT – Initial time alignment (factory set-

ting)

! AUTOTA – Time alignment created by auto

TA and EQ. (Refer to Auto TA and EQ (auto-

time alignment and auto-equalizing) on

page 67.)

! CUSTOM – Adjusted time alignment that

you can create for yourself

! OFF – Turn the time alignment off

! ADJUST – Adjust the time alignment as de-

sired

# You cannot select AUTOTA if auto TA and EQ

has not been carried out.

# You cannot select ADJUST when neither

FRONT-L nor FRONT-R is selected in POSITION.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment is memorized

in CUSTOM.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGN and then touch

ADJUST.

# You cannot select ADJUST when neither

FRONT-L nor FRONT-R is selected in POSITION.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT-L (front speaker left)—CENTER (center

speaker)—FRONT-R (front speaker right)—

REAR-R (rear speaker right)—REAR-L (rear

speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set

at OFF.

4 Touch c or d to adjust the distance be-

tween the selected speaker and the listen-

ing position.

Each time you touch c or d increases or de-

creases the distance. 0.0 to 500 cm is dis-

played as the distance is increased or

decreased.

5 Touch ESC to return to the playback dis-

play.

Available accessories

En

65

Section

04

Available accessories

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 84 85

Commentaires sur ces manuels

Pas de commentaire