Pioneer SUPER TUNER III D FH-P8000BT Manuel d'utilisateur télécharger pdf (Page 31)

2 Use MULTI-CONTROL to select

CONNECTION.

The connection menu is displayed.

Turn to change the menu option. Press to se-

lect.

3 Turn MULTI-CONTROL to select the

function.

PAIRED PHONE (paired phone)—

BT HANDS FREE (new phone)—SET PHONE

(phone registration)—DISCONNECT PHONE

(disconnect phone)—DELETE PHONE (delete

phone)

If the phone is not connected and not

paired

The following function can be operated.

! BT HANDS FREE (new phone)

If the phone is not connected but paired

The following functions can be operated.

! PAIRED PHONE (pair phone manually)

! BT HANDS FREE (new phone)

! DELETE PHONE (delete phone)

If the phone is connected but not paired

The following functions can be operated.

! SET PHONE (phone registration)

! DISCONNECT PHONE (disconnect phone)

! DELETE PHONE (delete phone)

If the phone is connected and paired

The following functions can be operated.

! DISCONNECT PHONE (disconnect phone)

! DELETE PHONE (delete phone)

Connecting and disconnecting

a cellular phone

Using a cellular phone to initiate a

connection

1 Display the connection menu.

Refer to Introduction to connection and pairing

on the previous page.

2 Use MULTI-CONTROL to select

BT HANDS FREE.

3 Use MULTI-CONTROL to select a group.

Push MULTI-CONTROL up or down to select a

group.

NOKIA (Nokia)—STANDARD (standard)

# Normally select STANDARD. If the device of

Nokia is not paired to this unit, select NOKIA.

# Push MULTI-CONTROL left or right to display

a group name or an ID.

4 Press MULTI-CONTROL to switch to

PAIR FROM PHONE.

Push MULTI-CONTROL up or down to switch

PAIR FROM PHONE and SEARCH DEVICE.

5 Select PAIR FROM PHONE and then

press MULTI-CONTROL to ready for pairing.

READY will be displayed.

6 Use your cellular phone to establish

connection.

PIN code is set to 0000 as the default. You can

change this code in the initial setting. Refer to

Entering PIN code for Bluetooth wireless con-

nection on page 51.

While connecting, CONNECTING is displayed.

If the connection is established, COMPLETED

is displayed.

After connected, this unit automatically

changes to PH.BOOK DL (phone book down-

load confirmation) display.

# If the connection fails, ERROR is displayed. In

this case, check the cellular phone and try again.

# If three cellular phones have already been

paired, the pairing assignment selection display

will appear. Select one assignment to pair the

new phone. The newly paired phone overwrites

the previously paired phone. The assignment se-

lection operation is the same as Step 3 to 4 of

Pairing a connected cellular phone on page 33 ex-

cept for the operation below.

! Switching the BD address and device name

7 Use MULTI-CONTROL to decide to

download the phone book from your cellu-

lar phone or not.

Push MULTI-CONTROL left or right to select

NO (No) or YES (Yes).

Press MULTI-CONTROL to decide.

Operating this unit

En

31

Section

02

Operating this unit

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Commentaires sur ces manuels

Pas de commentaire