Pioneer SUPER TUNER III D FH-P8000BT Manuel d'utilisateur télécharger pdf (Page 15)

3 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press BAND

or LIST.

# If you do not operate the list within about 30

seconds, the display automatically returns to the

ordinary display.

Using the remote control

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

# You can also recall radio station frequencies

assigned to preset tuning numbers by pushing

MULTI-CONTROL up or down during the fre-

quency display.

Introduction to advanced

operations

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se-

lect.

The function menu is displayed.

3 Turn MULTI-CONTROL to select the

function.

BSM (best stations memory)—LOCAL (local

seek tuning)

Notes

! You can also select the function by pressing

FUNCTION on the remote control.

! To return to the ordinary display, press BAND.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies.

1 Display the function menu.

Refer to Introduction to advanced operations

on this page.

2 Use MULTI-CONTROL to select BSM in

the function menu.

3 Press MULTI-CONTROL to turn BSM on.

The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Display the function menu.

Refer to Introduction to advanced operations

on this page.

2 Use MULTI-CONTROL to select LOCAL in

the function menu.

3 Press MULTI-CONTROL to turn local

seek tuning on.

# To turn local seek tuning off, press

MULTI-CONTROL again.

4 Push MULTI-CONTROL left or right to

set the sensitivity.

FM: LEVEL 1—LEVEL 2—LEVEL 3—LEVEL 4

AM: LEVEL 1—LEVEL 2

Operating this unit

En

15

Section

02

Operating this unit

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Commentaires sur ces manuels

Pas de commentaire