Pioneer CNDV-900HD Manuel d'utilisateur télécharger pdf (Page 4)

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest

authorised Pioneer Service Station.

! Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the

Media Number Card is lost, reissue of the

Media Number (MEDIA NUMBER) is not

possible. Also you must submit the Media

Number Card when repairs are needed.

The card is necessary as proof of authenti-

city if service is required (including recov-

ery).

Setting items to be deleted

and initialised

The following settings and items are cleared

or returned to the default after upgrade. (The

settings and items are not listed below will be

retained.)

Map function

View mode and scale setting on the map, di-

rection of the map

Route Setting

Current route and guidance status

[Destination] menu

! The history of “Auto fill-in function” for ci-

ties and streets

! Sorting order selected in [Address Book]

! The settings of [Options]([Route Over-

view])

[Map] menu

All settings

[Settings] menu

[Volume],[Regional Settings](except for

[Language])

[Vehicle Dynamics]

Right and left gauge type, [Adjust Style]

Others

Learnt data used in [Learning Route]

The user data stored in the hard disk drive of

the unit may be erased if unexpected error oc-

curs during software installation. Pioneer is

not responsible for any data loss or unavailabil-

ity of user data.

Visit Our Web site

Visit us at the following site:

http://www.pioneer.eu

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.

<IRB1017-A>10

Other Precautions

Engb

Checking the device number

First, check your device number

(DEVICE NUMBER, displayed such as

Device# or Device Number) of your navigation

system for later procedures. To display the de-

vice number, do the following.

1 Turn your navigation system on.

2 Press the MENU button to display the

navigation menu.

Navigation menu appears.

3 Touch the key in the following order in

the navigation menu.

[Settings] d [Hardware] d [Service Info

Screen]

4 Write down your “Device Number”

onto the supplied “MEDIA NUMBER CARD”

to avoid mistakes.

p Also write down “Version” information

which would be used to confirm completion

of the update.

Getting the password for

authentication

For upgrade, an unique password issued on-

line is necessary. Access the website with your

PC and get your password. The following infor-

mation is required.

— Media Number (MEDIA NUMBER) printed

on supplied Media Number Card

(MEDIA NUMBER CARD)

— Device Number (DEVICE NUMBER) of your

navigation system

1 Access on the following web site to

issue your password.

http://www.pioneer.eu/software

For issuing the password, follow the instruc-

tion on the website.

2 Record the password that you received.

You need to input this password accurately.

Write down your password to avoid mis-

takes.

This section describes the upgrade proce-

dures for your navigation system.

p The update has two phases.

Important notice:

For users who use AVIC -HD3

or use the sys-

tem upgraded to CNDV-800HD, updating an-

other software programme will begin first.

Note the same limitations written in Phase 2

when updating the programme.

Phase 1; Update the database

In this phase, take notice of the followings:

— All the functions other than AM and FM are

disabled during update. You can perform

simplified operations by using the TRK (c/

d) button and VOL (b/a) button. (We re-

commend changing the AV source to AM

or FM before you start the update.)

— The update takes approximately 1 hours in

total.

— If you turn the ignition switch off (the navi-

gation system turns off) or eject the up-

grade disc, the update resumes when the

navigation system turns on or the disc is re-

inserted.

<IRB1017-A>11

Preparation for upgrade

Instructions for upgrading

Engb

Phase 2; Update the system

programme

In this phase, take notice of the followings:

— No functions are available.

— The update takes approximately 10 min-

utes.

— NEVER stop the engine of your vehicle nor

turn off the power supply to the navigation

system until the installation is completed.

Turning the power off in this phase causes

a malfunction or failure of the navigation

system.

Upgrade procedures

1 Park your vehicle in a safe place.

Leave the engine on, and make sure that the

handbrake is applied.

2 Press the MAP button to display the

current location.

Be sure to display the map of current position.

The updating cannot start at the other

screens, such as the scroll mode, the naviga-

tion menu and AV screen.

3 Press OPEN CLOSE button and insert

the upgrade disc into the disc loading slot.

CAUTION

For users who use AVIC-HD3

or use the system up-

graded to CNDV-800HD, updating another software

programme will begin first.

While this screen is visible, NEVER switch the

key position from ACC or turn off the navigation

system.

After the installation is complete, the navigation sys-

tem restarts.

Check the details of the caution message and touch

[OK].

p The users who use other models can skip this

caution and proceed to the next step.

The message confirming whether or not to

start the update will appear.

p If the message doesn’t appear, eject the

disc and display the map of current position

and then reinsert the disc.

<IRB1017-A>12

Instructions for upgrading

Engb

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Pioneer CNDV-900HD Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia automobile Pioneer CNDV-900HD