Pioneer CNDV-800HD Manuel d'utilisateur télécharger pdf (Page 7)

STEP 2; Upgrade procedures

This section describes the upgrade procedures

for your navigation system.

1 Park your vehicle in a safe place.

Leave the ignition in the “ACC” position and

make sure that the handbrake is applied.

2 Press the MAP button to display the cur-

rent location.

Be sure to display the map of current position.

The updating cannot start at the other

screens, such as the scroll mode, the naviga-

tion menu and AV screen.

3 Press OPEN CLOSE button and insert the

upgrade disc into the disc loading slot.

The message confirming whether or not to

start the update will appear.

❒ If the message doesn’t appear, eject the

disc and display the map of current posi-

tion and then reinsert the disc.

4 Touch [Yes].

❒ To cancel the update, touch [No].

Important notice:

The update has two phases.

Phase 1; Update the database

In this phase, take notice of the followings:

— All the functions other than AM and FM

are disabled during update. You can per-

form simplified operations by using the

TRK (/) button and VOL (/) but-

ton. (We recommend changing the AV

source to AM or FM before you start the

update.)

— The update takes approximately 3 hours in

total.

— If you turn the ignition switch off (the navi-

gation system turns off) or eject the

upgrade disc, the update resumes when

the navigation system turns on or the disc

is reinserted.

Phase 2; Update the system pro-

gramme

In this phase, take notice of the followings:

— No functions are available.

— The update takes approximately 10 min-

utes.

— NEVER stop the engine of your vehicle nor

turn off the power supply to the navigation

system until the installation is completed.

Turning the power off in this phase causes

a malfunction or failure of the navigation

system.

1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire