Pioneer AVIC X3 Manuel d'opérations Page 110

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 164
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 109
108
Chapter 8Customising the AV Source Setting AV
2 Touch 8 or 2 to adjust front/rear speaker
balance.
Each time you touch 8 or 2 moves the front/
rear speaker balance towards the front or the
rear.
Front:15 to Rear:15 is displayed as the front/
rear speaker balance moves from front to rear.
Both Front:0 and Rear:0 are the proper set-
ting when only two speakers are used.
When the rear output setting is Rear SP
Sub. W, you cannot adjust front/rear speaker
balance.
“Setting the rear output and subwoofer
controller” Page 113
3 Touch 4 or 6 to adjust left/right speaker
balance.
Each time you touch 4 or 6 moves the left/
right speaker balance towards the left or the
right.
Left:9 to Right:9 is displayed as the left/right
speaker balance moves from left to right.
Adjusting equaliser curves
You can adjust the currently selected equaliser
curve setting as desired. Adjusted equaliser
curve settings are memorised in Custom1.
If you make Custom2 adjustments, Custom2
curve is updated.
You can adjust the centre frequency, level and
the Q factor (curve characteristics) of each
currently selected curve band (Low/Mid/
High).
Band:
You can select the equaliser band.
Frequency:
You can select which frequency to be set as
the centre frequency.
Level:
You can select the decibel (dB) level of the
selected EQ.
Q:
You can select the details of the curve charac-
teristics.
1 Touch “EQ Menu” in the Sound menu.
2 Touch “Customize”.
3 Touch 4 or 6 to select the equaliser band
to adjust.
Each time you touch 4 or 6 selects equaliser
bands in the following order:
LowMidHigh
4 Touch 4 or 6 to select the desired fre-
quency.
Touch 4 or 6 until the desired frequency
appears in the display.
Low: 4080100160 (Hz)
Mid: 2005001K2K (Hz)
High: 3.15K8K10K12.5K (Hz)
5 Touch 4 or 6 to adjust the level of the
equaliser band.
Each time you touch 4 or 6 increases or
decreases the level of the equalisation band.
+12 to –12 is displayed as the level is
increased or decreased.
6 Touch 4 or 6 to select the desired Q fac-
tor.
Touch 4 or 6 until the desired Q factor
appears in the display.
Wide2Wide1Narrow1Narrow2
If you make adjustments, Custom1 curve
is updated.
Setting the simulated sound
stage
You can select the desired effect from various
simulated sound stage, such as Music Studio or
Dynamic Theater. You can also adjust a listener
positioning effect.
Setting a stage that fits your image
1 Touch “Staging” in the Sound menu.
2 Touch the desired stage setting.
The “Living Room” setting that empha-
sises midrange sound hardly has any
effect near the maximum volume level.
Audio Adjustments
MAN-AVIC-X3-EN.book Page 108 Wednesday, June 6, 2007 10:15 AM
Vue de la page 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Commentaires sur ces manuels

Pas de commentaire