Pioneer VSX-824-K Manuel d'utilisateur télécharger pdf (Page 2)

Connecting up

Connecting the speakers

The receiver will work with just two stereo speakers (the front speakers in the diagram) but using

at least three speakers is recommended, and a complete setup is best for surround sound.

To achieve the best possible surround sound, install your speakers as shown below.

5.1 channel surround system:

After installing the speakers, connect them as shown below.

LINE LEVEL

INPUT

– Front Left

– Center

– Front Right

– Surround Left

– Surround Right

– Subwoofer

Connecting the speaker cables

Make sure you connect the speaker on

the right to the right (

) terminal and the

speaker on the left to the left (

) terminal.

Also make sure the positive and negative

(

+/–

) terminals on the receiver match those

on the speakers.

CAUTION

• Before making or changing

connections, switch off the power and

disconnect the power cord from the AC

outlet.

• These speaker terminals carry

HAZARDOUS LIVE

voltage. To prevent

the risk of electric shock when

connecting or disconnecting the

speaker cables, disconnect the power

cord before touching any uninsulated

parts.

Twist exposed wire strands together.

Loosen terminal and insert exposed wire.

Tighten terminal.

12 3

10 mm

Connect the center and surround speaker

terminals of VSX-424/VSX-329 as shown below:

Twist exposed wire strands together.

Push open the tabs and insert exposed

wire.

Release the tabs.

12 3

10 mm

Subwoofer

(

)

Front Right (

)

Surround Right

(

)

Surround Left

(

)

Front Left (

)Center (

)

VSX-824

The type of center and surround speaker terminals for VSX-424/VSX-329 is different from this

diagram.

You can use speakers with a nominal impedance between 6

and 16

English

1 2 3 4 5 6 7 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-824-K Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-824-K