Pioneer S-LX70-LR Manuel d'utilisateur télécharger pdf (Page 5)

3 Temporarily attach the bracket (for wall) to the specified

location on the template.

Align the bracket (for wall) to the specified location on the template,

and temporarily attach with a screw (6 mm diameter screw

recommended) at location [A].

Adjust the attachment position of the bracket so that it is aligned

with the template.

• The following illustration is an example of attaching the right

bracket (for wall).

4 Attach the bracket (for wall).

Attach bracket with screws (6 mm diameter screws recommended)

at the 4 locations [B] (recommended). Firmly tighten the screw [A]

that was used to temporarily attach the bracket to the wall as well.

To avoid speaker from wobbling or falling off, firmly attach bracket

at multiple locations.

• Afterwards, remove the template by tearing along the

perforations.

• The following illustration is an example of attaching the bracket

with screws at five locations: Screw location [A] and the 4

corners of screw location [B] (recommended).

5 Attach the bracket (for speaker) onto speaker.

Attach the bracket on with supplied screws (long) at the 4 screw

holes.

The brackets have a direction in which it should be attached. Attach

correctly using the following illustration as a reference.

6 Attach speaker onto bracket (for wall).

• The following illustration does not show the speaker attached to

the bracket (for speakers) for description purposes.

• Mounting the left speaker

Place the bottom right edge of the bracket (attached on the

speaker) on top of the guide of the left bracket (for wall) from a

diagonal angle ( ).

Bring left side of both brackets together so that they become

horizontal to each other ( ).

Move slightly to the right and slide down until stops, while aligning

the right protruding section to the groove of the left bracket (for

wall) ( ).

• Mounting the right speaker

Place the bottom left edge of the bracket (attached on the speaker)

on top of the guide of the right bracket (for wall) from a diagonal

angle ( ).

Bring right side of both brackets together so that they become

horizontal to each other ( ).

Move slightly to the left and slide down until stops, while aligning

the left protruding section to the groove of the right bracket (for

wall) ( ).

[A]

[B]

Top

Back of speaker

Bottom

Guide

S_LX70-LR_En.book 5 ページ２００７年９月１３日　木曜日　午後４時３９分

1 2 3 4 5 6 7 8 9 10 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Pioneer S-LX70-LR Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer S-LX70-LR