Pioneer BDP-LX70A Manuel d'utilisateur télécharger pdf

Connecting your TV and AV receiver using HDMI cables

• Using HDMI cables allows you to transfer signals to an HDMI-compatible TV and AV receiver in digital format, with no loss in picture or

sound quality.

• When connecting this player to your TV, AV receiver or other equipment, make sure that all components are ‘switched off’ and

‘unplugged’.

• Also refer to the instruction manuals of the connected components.

Audio formats supported by HDMI output of this player

• 8-channel linear PCM signals (44.1 kHz to 192 kHz, 16 bit/20 bit/

24 bit)

There are some restrictions depending on the sampling rate.

(See page 42 in the Operating Instructions.)

• Dolby TrueHD (7.1 channel signals)

• Dolby Digital Plus (7.1 channel signals)

• Dolby Digital (5.1 channel signals)

• DTS-HD Master Audio (7.1 channel signals)

• DTS-HD High Resolution Audio (7.1 channel signals)

• DTS (5.1 channel signals)

*1 If the connected HDMI device is not compatible with Dolby TrueHD

or Dolby Digital Plus, the signal will be output as Dolby Digital.

*2 If the connected HDMI device is not compatible with DTS-HD

Master Audio or DTS-HD High Resolution Audio, the signal will be

output as DTS.

Important

• Depending on the HDMI cable being used, 1080p output may

not appear correctly. We recommend using a commercially

available HDMI cable that supports the HDMI 1.3 specification

(Category 2) or later. (The supplied HDMI cable is capable of

outputting 1080p video.)

• If you change any components connected to the HDMI output,

press the OUTPUT RESOLUTION button to change the output

video resolution settings. (See page 12 in the Operating

Instructions.)

• DVI devices that are not compatible with HDCP (computer

displays, etc.) cannot be connected to this player.

AUDIO OUT

(5.1ch)

DIGITAL AUDIO OUT

AUDIO OUT

(2ch)

CENTER

SUB WOOFER

FRONT

SURROUND

COAXIAL OPTICAL

COMPONENT

VIDEO OUT

LAN(100)

HDMI OUT

SETTING 2

SETTING 1

IR RECEIVER

CONTROL

Rear panel of this player

HDMI-compatible display

To HDMI input

From HDMI output

AV receiver

HDMI cable (supplied)

HDMI cable

(not supplied)

<VRR1089-A>

1 2

IR RECEIVER 1

Résumé du contenu

Page 1 - IR RECEIVER

EnConnecting your TV and AV receiver using HDMI cables• Using HDMI cables allows you to transfer signals to an HDMI-compatible TV and AV receiver in d

Page 2

FrRaccordement de votre téléviseur et récepteur AV par des câbles HDMI• Les câbles HDMI permettent de transmettre à un téléviseur et un récepteur AV d