Pioneer PDP-5080XA Manuel d'utilisateur télécharger pdf (Page 40)

Useful adjustment settings09

Changing the password

Use the following procedure to change the password.

1 Press HOME MENU.

2 Select “Setup“ (

/

then ENTER).

3 Select “Password“ (

/

then ENTER).

The password entry screen appears. Enter the current four-digit

password using buttons 0 to 9.

4 Select “Change Password“ (

/

then ENTER).

5 Enter a four-digit password to be newly set, using buttons 0

to 9.

6 Enter the same password that you have entered in step 5.

• If a different password is entered, the operation goes back to

step 5 for reentry from the beginning.

• You can try up to three times to reconfirm the new password

before the Change Password screen is automatically exited.

7 Press HOME MENU to exit the menu.

Note

• Take a note of the newly set password and keep it handy.

Resetting the password function

1 Press HOME MENU.

2 Select “Setup“ (

/

then ENTER).

3 Select “Password“ (

/

then ENTER).

The password entry screen appears. Enter your four-digit password

using buttons 0 to 9.

4 Select “Reset“ (

/

then ENTER).

5 Select “Yes“ (

/

then ENTER).

6 Press HOME MENU to exit the menu.

Note

• The above procedure will reset the password to the factory

default (1 2 3 4).

Disabling the password function

Use the following procedure if you want to deactivate the protection

function that prompts password entry. The factory default is

“Enable”.

1 Press HOME MENU.

2 Select “Setup“ (

/

then ENTER).

3 Select “Password“ (

/

then ENTER).

The password entry screen appears. Enter your four-digit password

using buttons 0 to 9.

4 Select “Password Setting“ (

/

then ENTER).

5 Select “Disable“ (

/

then ENTER).

6 Press HOME MENU to exit the menu.

Note

• The above procedure will reset the password to the factory

default (1 2 3 4).

• After disabling the password function, you cannot change the

Child Lock settings. See Setting Child Lock on page 25.

• After disabling the password function, you cannot change or

reset the password.

• When you enable the password function again after disabling it,

the factory default password (1 2 3 4) is restored.

Change Password

Please Input New Password.

Reconfirm New Password.

We suggest you write down your password so you don’t forget it.

If you forget the password

When the message “Please Input Your Password.” is displayed,

press the ENTER button on the remote control unit and hold it

down for three seconds or longer.

The password reverts to “1234”.

PDP-5080XA/PDP-4280XA

Your password No.:

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-5080XA Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer PDP-5080XA