Pioneer PDK-1015 Manuel d'utilisateur télécharger pdf (Page 3)

English

Checking the Standard Accessories

Check to make sure that you have all the standard accessories before assembly and installation.

• Note that a Phillips screwdriver (not included) is required for assembly.



Base cover x 1

 Stand pipes

(left and right, interchangeable) x 2

 Screws

(M5 x 10 mm: silver) x 6

 Installation bolts

(M6 x 20 mm: black) x 4

 Operating instructions

(this document) x 1

Assembling the Stand

Assembly Procedure

1 Turn the base cover over so the underside

is facing up.

Note

When the base cover is turned over, be very careful not

to scratch or damage the front surface of the base cover.

2 Insert the stand pipes into the base cover.

3 Tighten the screws to stabilize the stand

pipes.

Note

 Assemble the stand with a soft sheet placed under the

base cover.

If a sheet is not laid before assembly, the front surface of

the base cover may be scratched.

 Due to the manufacturing process of the base cover, there

may be a “weld line” exposed in the plastic. Note that this

will not cause any damage to the product, and does not

reflect any flaws in the product design.

 Cable clamps x 2

Operating instructions

Mode d’emploi

Table top stand

Pied de table

PDK-1015

Base cover

Screws

(M5 x 10 mm: silver)

Stand pipe

Screws

(M5 x 10 mm: silver)

Sheet

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDK-1015 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer PDK-1015