VARIOUS OPERATIONS
I
To program tracks/discs in a desired
order (PROGRAM play)
• The remote control is the most convenient way to perform these
operations.
• You can program up to 36 steps.
• The parenthesis ( ) show operations for the main unit.
Operation exampie: Programming disc 2, track 7 as step
and disc 5, track 3 as step 2.
T
PGM
o
PROGRAM
( O )
Press PGM (PROGRAM) dur
ing stop mode.
I
DISC
SET
o
Use the digit buttons to se
lect the disc, then press DISC
SET.
(Use DISC (-/+) to select the disc
number, then press PROGRAM.)
PROBFIAM
(<=
T
)
The PGM indicator starts to blink.
X
O
TRACK
SET
O
Use the digit buttons to se
lect the track, and press
TRACK SET.
(Use to select the
track number, then press PROGRAM.)
PROGRAM
□ISC Repeat steps 2 and 3 to pro-
PROGRAM
(iZZZlC
16
<PRB1278>
□ □
PROGRAM
T
o
Press ► .
The program play starts from the
track that was programmed first.
( L-"' I )
• items stored in memory are saved, even if the power cord is
unplugged.
(Memory Back-Up Function).
The following operations can only be performed
during normal play, HI-LITE scan or PREVIOUS scan
<Programming tracks during normal play>
(Direct program)
1. Press PGM (PROGRAM).
• Program mode is activated.
2. Press PGM (PROGRAM) during playback.
• The current track is programmed.
<Programming during normal playback (remote control only)>
(Preprogramming)
You can program during normal playback.
(^Operation example vvvv
• The player changes to program play when the current track
finishes playing back.
• To change to program mode directly, press ► .
The following operations can only be performed
during stop ntode ' ' ‘
<Programming an entire disc as one step>
(Disc all program)
If you skip step ^ of the operation example, disc 2 is programmed
as step 1.
<Programming a pause (remote control only)>
(Pause program)
If you press
II
at step^^, you can program a pause. When you press
II,
"PA" appears in the display instead of the disc number.
• For example, when making a program for recording both sides of
a cassette tape, press
II
to insert a pause after programming the
tracks for one side. After turning the tape over, press ll to resume
recording.
NotesH
• You cannot program a pause as the r <
pluses r a row
• Wnen you prograr^ i pause it coums a- 7 steo ana reuuces tne
rota! nu 7 oe' o trac-.s j-o i can prograr
• To erase a program...
Press ■ twice during playback (or once in stop mode). You can also
erase the program by pressing MODE, RANDOM, PREVIOUS, or
SINGLE LOADER PLAY in either play or stop mode (or by
pressing BEST in stop mode).
• To cancel a program step
In stop mode, each time you press CLEAR, the last step in the
program is erased.
• If a programmed disc is missing or inserted backwards
during program play, " * * NO DISC" appears in the display,
the step is automatically erased, and playback proceeds to the
next step.
• Program contents are stored in memory even when the power
is turned off (STANDBY).
Notes!!
____
• if stepy^ is carried out before the accumuiated time is dispiayed,
the program piay starts and the time is not .dispiayed.
• When UNLOAD is pressed whiie a program has been entered, the
disc for the 1st program step comes on the center position and the
hood opens.
• The dispiay is not shown if the totai time of the program is 100
minutes or more.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels