Pioneer PD-F958 Manuel d'utilisateur télécharger pdf (Page 7)

CONNECTIONS

Before making or changing the connections, switch off the. power switch and disconnect the power cord from the AC outlet.

To the CONTROL IN jack of

the Pioneer component

bearing the B mark.

(except for European and

U.K. models)

Control cable (Except for Eu

ropean and U.K. models)

Control input jack

(Except for U.K. model)

Control output jack

(Except for European and

U.K. models)

(^Optical fiber cable

Control cable (Except for European and U.K. models)

(Be sure to use the supplied CD-DECK SYN

CHRO control cord with the cassette deck.)

Illustration not applicable to p.

European and U.K. models l| 'oHEJ

Cassette deck

(D I/O INTERFACE

(Except for U.K. model)

CD-DECK SYNCHRO cable

-- --- --- ---- --- ---- --- --- -V

□

1—-

' *

Power cord

(A) Making connections

Q] Connect the OUTPUT jacks of this unit to the input jacks (CD

or AUX) of the amplifier. Make sure that the white plugs are

connected to the left (L) jacks and the red plugs to the right (R)

jacks.

• Be sure not to connect this unit to the amplifier's PHONO

jacks, as sound will be distorted and normal playback will not

be possible.

[U Connect the power cord to a household AC wall outlet.

• Make sure plugs are inserted fully into the wall outlet.

Note!!

Do not connect the power cord to an AC outlet on your amplifier.

If you connect the power cord to a “SWITCHED' AC outlet on an

amplifier, you will not be able to use this unit's memory function.

©Connecting the OPTICAL FIBER CABLE

This unit can be connected to an amplifier equipped with an optical

digital jack.

1. Remove the protective dust cap from this unit’s DIGITAL OUT

OPTICAL jack.

2. Use an optical fiber cable to connect the DIGITAL OUT OPTICAL

jack of this unit to the optical input jack of the amplifier.

• Align the plug of the optical fiber cable with the optical digital jack

and fully insert the plug to make a secure connection.

Use a separately sold optical fiber cable for the optical digital jack

connections.

Precautions concerning use of optical fiber cables

• Fuily insert the optical fiber cable plugs all the way into the jacks.

• Be careful not to fold or crimp the cable. When coiling an optical

fiber cable for storage, make sure the diameter of the coil is 15 cm

(6 in.) or larger.

• Use an optical fiber cable with a length of 3 m (10 ft.) or less.

• Protect the optical fiber cable plugs from scratches and dust.

• When the unit is not connected using an optical fiber cable, be sure

to keep the protective dust cap plugged into the optical digital

output jack at all times.

has the 9 mark (Except for European and U.K. models)

When a Pioneer stereo amplifier bearing the HI mark is used,

connect the CONTROL IN jack on the rear panel of the CD player

to the CONTROL OUT jack of the amplifier. This will enable the

CD player.to be controlled using the remote control unit supplied

with the stereo amplifier. If you do not plan to use this feature, it

is not necessary to connect the CONTROL IN/OUT jacks.

• The remote control unit supplied with the amplifier can be used

to control Play, Stop, Pause, Track/Disc Search and Disc Change

operations.

• For instructions regarding connections and operation, refer to

the operating instructions provided with your stereo amplifier.

Notes!!

• When a control cable Is connected to the player's CONTROL

IN jack, direct control of the player with the remote control unit

is not possible. Operate the player with the remote control unit

by aiming it at the amplifier.

• Be sure to connect both of the control cable's plugs securely to

the CONTROL IN and CONTROL OUT jacks. Do not connect

only one end of the cable.

• Be sure to turn off the power of the amplifier before connecting

the power cord and output cable.

• When only the digital output Is connected, the remote sensor of

the amplifier does not function. To operate it, connect the output

cable to the stereo amplifier as well as connecting the digital

output.

• The CONTROL IN jack on the European model is for connect

ing the PD-AP1 controller.

If you have a Pioneer cassette deck provided with the CD-Deck

synchro function, connect the CD-DECK SYNCHRO jacks of the

CD player and cassette deck. With this function, synchro record

ing can be carried out between the player and deck.

• For details on connections and operation, refer to the operating

instructions supplied with the cassette deck.

• The CD-DECK SYNCHRO cable is not supplied with the CD

player.

• When CD-Deck synchro recording is carried out on several discs,

use the program playback function. (Refer to page 16 for details

of program playback.)

Note!!

In order to enable the CD-DECK SYNCHRO recording function, the

Output cable must be connected to the stereo amplifier.

(Except for U.K. model)

Terminal for connecting the controller (optional). The PD-AP1 is

capable of simultaneous control of up to 3 units of this model.

When using the optional controller, use the I/O interface with the

CONTROL IN jack. (Refer to 19 page)

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Pioneer PD-F958 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer PD-F958