Pioneer FH-P6200 Manuel d'utilisateur télécharger pdf (Page 34)

2 Press c or d to select an equalizer

curve.

Each press of c or d selects equalizer curves

in the following order:

S-BASSPOWERNATURALVOCAL

FLATCUSTOM1CUSTOM2

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of FLAT, can be adjusted to a fine

degree (nuance control).

1 Recall an equalizer curve.

See Recalling equalizer curves on the previous

page.

2 Press a or b to adjust the equalizer

curve.

Each press of a or b increases or decreases

the equalizer curve respectively.

+6  5 (or 6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 9-band graphic equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the level of each band.

! A separate CUSTOM1 curve can be cre-

ated for each source. (The built-in CD

player and the multi-CD player are set to

the same equalizer adjustment setting

automatically.) If you make adjustments

when a curve other than CUSTOM2 is se-

lected, the equalizer curve settings will be

memorized in CUSTOM1.

! A CUSTOM2 curve can be created com-

mon to all sources. If you make adjust-

ments when the CUSTOM2 curve is

selected, the CUSTOM2 curve will be up-

dated.

1 Recall the equalizer curve you want to

adjust.

See Recalling equalizer curves on the previous

page.

2 Press DSP to select 9-band graphic

equalizer.

Press DSP until 50Hz appears in the display.

# If 9-band graphic equalizer has been pre-

viously adjusted, the frequency of that previously

selected will be displayed instead of 50Hz.

3 Press c or d to select the equalizer

band to adjust.

Each press of c or d selects equalizer bands

in the following order:

501002004008001.6 k3.15 k

6.3 k12.5 k (Hz)

4 Press a or b to adjust the level of the

equalizer band.

Each press of a or b increases or decreases

the level of the equalization band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust

the level.

Using the position selector

One way to assure a more natural sound is to

clearly position the stereo image, putting you

right in the center of the sound field. The posi-

tion selector adjusts the volume level of sound

from each speaker to match seat positions

and the number of people in the car and lets

you recall settings at the touch of a button.

Here is a list of the positions:

Digital Signal Processor

En

34

Section

09

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Commentaires sur ces manuels

Pas de commentaire