Pioneer Super Tuner III D AVH-P6850DVD Manuel d'utilisateur télécharger pdf (Page 95)

Black plate (95,1)

# When a subwoofer is connected to the rear

output, set for subwoofer SUB. W.

# When the rear output setting is SUB. W, you

cannot change the subwoofer controller.

3 Touch c or d on the PREOUT setting to

switch the subwoofer output or non fading

output.

Touch c to select subwoofer output and

SUB.W appears in the display. Touch d to se-

lect non fading output and FULL appears in

the display.

Notes

! Even if you change this setting, there is no

output unless you turn the nonfading output

(refer to Using nonfading output on page 72)

or subwoofer output (refer to Using subwoofer

output on page 72) in the audio menu on.

! If you change the subwoofer controller, sub-

woofer output and nonfading output in the

audio menu return to the factory settings.

Setting the FM tuning step

The FM tuning step employed by seek tuning

can be switched between 100 kHz, the preset

step, and 50 kHz.

% Touch FM STEP on the initial menu to

select the FM tuning step.

Touching FM STEP will switch the FM tuning

step between 50 kHz and 100 kHz. The se-

lected FM tuning step will appear in the dis-

play.

Note

If seek tuning is performed in 50 kHz steps, sta-

tions may be tuned in imprecisely. Tune in the sta-

tions with manual tuning or use seek tuning

again.

Setting the AM tuning step

The AM tuning step can be switched between

9 kHz, the preset step, and 10 kHz. When

using the tuner in North, Central or South

America, reset the tuning step from 9 kHz (531

kHz to 1 602 kHz allowable) to 10 kHz (530 kHz

to 1 640 kHz allowable).

% Touch AM STEP on the initial menu to

select the AM tuning step.

Touching AM STEP will switch the AM tuning

step between 9 kHz and 10 kHz. The selected

AM tuning step will appear in the display.

Changing languages for

CAUTION

Some operations on this unit are prohibited

while driving or needs to be paid a careful at-

tention when operating. In such case, a cau-

tion appears on the display. You can change

the language of the cautions at this setting.

% Touch CAUTION on the initial menu to

select your desired language.

Each time you touch CAUTION, the language

for CAUTION is switched.

Switching the sound

muting/attenuation

Sound from this system is muted or attenu-

ated automatically when the signal from the

equipment with mute function is received.

! The sound is turned off, MUTE is displayed

and no audio adjustments are possible.

! The sound is attenuated, ATT is displayed

and no audio adjustments, except volume

control, are possible.

<CRB2163-B>95

Initial Setup

En

95

Section

20

Initial Setup

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 119 120

Commentaires sur ces manuels

Pas de commentaire