Pioneer AVIC F900BT Manuel d'utilisateur télécharger pdf (Page 100)

1 Touch [BSM].

2 Touch [Start] to start “BSM”.

BSM begins to flash. While BSM is flashing,

the six strongest broadcast frequencies will be

stored under the preset tuning keys [P1]to

[P6] in order of their signal strength. When

this is complete, BSM stops flashing.

p To cancel the storage process, touch

[Stop].

p Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have already saved by using [P1]to[P6].

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programmes.

% Touching [Regional] switches between

[On] and [Off].

p Regional programming and regional net-

works are organised differently depending

on the country (i.e., they may change ac-

cording to the time, country or broadcast

area).

p The preset number may disappear on the

display if the tuner tunes in a regional sta-

tion that differs from the originally set sta-

tion.

p The regional function can be turned on or

off independently for each FM band.

Tuning in strong signals

Local seek tuning allows you to tune in only

those radio stations with sufficiently strong

signals for good reception.

1 Touch [Local].

2 Touch [On] to turn local seek tuning on.

To turn local seek tuning off, touch [Off].

3 Touch [cPrev] or [Nextd] to set the sen-

sitivity.

There are four levels of sensitivity for FM.

Level: 1 — 2 — 3 — 4

p The level “4” setting allows reception of only

the strongest stations, while lower settings

let you receive weaker stations.

Searching for an RDS station by

PTY information

You can search for general types of broadcast-

ing programmes.

= For details, refer to PTY list on page 103.

1 Touch cPrev or Nextd to select a pro-

gramme type.

There are four programme types:

News&INF — Popular — Classics — Others

2 Touch [Start] to begin the search.

The tuner searches for a station broadcasting

that programme type.

p To cancel the search, touch [Stop].

p The programmes of some stations may dif-

fer from that indicated by the transmitted

PTY.

p If no station is broadcasting the type of pro-

gramme you searched for, Not Found is

displayed for about two seconds and then

the tuner returns to the original station.

Receiving PTY alarm broadcasts

PTY alarm is a special PTY code for announce-

ments regarding emergencies such as natural

disasters. When the tuner receives the radio

alarm code, ALARM appears on the display

and the volume adjusts to the TA volume.

When the station stops broadcasting the

emergency announcement, the system re-

turns to the previous source.

p An emergency announcement can be can-

celled by touching [Cancel].

p You can also cancel an emergency an-

nouncement by changing the source or

band.

Using the radio (FM)

Engb

100

Chapter

18

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 171 172

Commentaires sur ces manuels

Pas de commentaire