Pioneer AVIC F900BT Manuel d'utilisateur télécharger pdf (Page 127)

2 Touch [Loudness] to select a desired

level.

Each time you touch [Loudness], the level is

selected in the following order:

Off — Low — Mid — High

Using subwoofer output

The navigation system is equipped with a sub-

woofer output mechanism, which can be

turned on or off.

p Only when “Sub Woofer” is [On], you can

adjust “Phase”, “Level” and “Frequency”.

1 Touch [Sub Woofer] on the “AV Sound”

menu.

= For details, refer to Displaying the “AV

Sound” menu on page 124.

2 Touch [On] to turn subwoofer output

on.

To turn subwoofer output off, touch [Off].

3 Touch [Reverse] or [Normal] to select

the phase of subwoofer output.

4 Touch [+] or [-] next to “Level” to adjust

the output level.

+6 to -24 is displayed as the level is increased

or decreased.

5 Touch [+] or [-] next to “Frequency” to

select cut-off frequency.

Each time you touch [+]or[-], cut-off frequen-

cies are selected in the following order:

50 Hz — 63 Hz — 80 Hz — 100 Hz — 125 Hz

Only frequencies lower than those in the se-

lected range are output from the subwoofer.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, activate HPF

(high pass filter). Only frequencies higher than

those in the selected range are output from

the front or rear speakers.

1 Touch [HPF] on the “AV Sound” menu.

= For details, refer to Displaying the “AV

Sound” menu on page 124.

2 Touch [HPF] to select cut-off frequency.

Each time you touch [HPF] selects cut-off fre-

quencies in the following order:

Off — 50 Hz — 63 Hz — 80 Hz — 100 Hz —

125 Hz

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

p Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

2 Touch [SLA] on the “AV Sound” menu.

= For details, refer to Displaying the “AV

Sound” menu on page 124.

3 Touch [+] or [-] to adjust the source vo-

lume.

+4 to -4 is displayed as the source volume is

increased or decreased.

Following AV sources are set to the same

source level adjustment volume automatically.

! CD, ROM, DivX (for AVIC-F900BT)

! CD, ROM (for AVIC -F700BT)

! AV1 and AV2

p The different source volume level can be set

between iPod and USB.

Customising preferences

Engb

127

Chapter

21

Customising preferences

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 171 172

Commentaires sur ces manuels

Pas de commentaire