Pioneer X1 Manuel d'opérations télécharger pdf (Page 54)

52

Chapter 4

Editing the Navigation Utilities NAVI

6 Touch a picture you want for the back-

ground.

7 Select how to display the picture.

You can select the following items:

“Centre” :

Selected picture is displayed at the centre of

the screen.

“Repeat” :

Selected picture is repeated in a pattern to

cover the whole screen.

❒ When selecting images already stored on

the Pioneer DVD map disc, you cannot

select the layout method for those images.

The background image starts changing. After

a short while, the new background image

appears.

8 Touch “Done”.

On this screen, you can select the following

items:

Select another Picture :

This is selected when you want to change to

another picture. Return to Step 5.

Change to another background :

Select if you want to successively change the

Audio Operating screen backgrounds or the

Navigation backgrounds. Return to step 3.

❒ When the picture starts to change, do not

turn off the vehicle engine until the mes-

sage appears to indicate that the picture

has finished changing.

❒ When the navigation system is reset, or the

language setting is changed, the back-

ground picture may change back to the

original picture. (There is also a possibility

that the system will revert to the original

picture for some other reason.) If this hap-

pens, set the background picture again.

Setting the Vehicle Dynamics

Display

You can change the values displayed by the

instruments on the left and right of the Vehicle

Dynamics Display.

Until the sensor’s initial learning is complete,

only the voltage and clock are displayed.

1 Switch to the Vehicle Dynamics Display.

➲ Changing the map display mode ➞

Page 24

2 Touch the left or right instrument.

Touch keys are displayed.

3 Touch the items you want to display.

You can select the following items.

• Voltage

Displays the power supply and voltage sup-

plied from the battery to this system.

• Acceleration:

Acceleration in a forward direction is dis-

played. The + sign indicates acceleration

while the – sign indicates deceleration.

• Side Acceleration:

Acceleration in a side direction such as when

turning, is displayed. The + sign indicates a

right turn, while the – sign indicates a left

turn.

• Angular Velocity

Displays the vehicle’s turning angle over one

second (how far it has turned in a second).

• Slope

Displays the vehicle’s vertical movement. The

+ side represents the rising angle, and the –

side the falling angle.

• Direction:

The direction your vehicle is travelling in is dis-

played.

• Clock :

Current time is displayed.

• Adjust Look:

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 154 155

Commentaires sur ces manuels

Pas de commentaire