Pioneer FH-P800BT Manuel d'utilisateur télécharger pdf (Page 44)

Introduction of audio

adjustments



1 Audio display

Shows the audio adjustment status.

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-

lect.

The audio menu is displayed.

3 Turn MULTI-CONTROL to select the

audio function.

Turn MULTI-CONTROL to switch between the

audio functions in the following order.

FADER/BALANCE (balance adjustment)—

EQUALIZER (graphic equalizer adjustment)—

G.EQ ADJUST (7-band graphic equalizer ad-

justment)—LOUDNESS (loudness)—SUB W1

(subwoofer on/off setting)—SUB W2 (subwoo-

fer setting)—BASS BOOST (bass boost)—

HIGH PASS FILTER (high pass filter)—SLA

(source level adjustment)

# You can also select the audio function by

pressing AUDIO on the remote control.

# You can select the SUB W2 only when sub-

woofer output is turned on in SUB W1.

# When selecting FM as the source, you cannot

switch to SLA.

# To return to the display of each source, press

BAND.

# If you do not operate functions except for

G.EQ ADJUST within about 30 seconds, the dis-

play is automatically returned to the ordinary dis-

play.

Using balance adjustment

You can change the fader/balance setting so

that it can provide the ideal listening environ-

ment in all occupied seats.

1 Display the audio menu.

Refer to Introduction of audio adjustments on

this page.

2 Use MULTI-CONTROL to select

FADER/BALANCE.

3 Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves

towards the front or rear.

F15to R15is displayed as the front/rear

speaker balance moves from front to rear.

# 0 is the proper setting when only two speakers

are used.

# When the rear output setting is

REAR SP :S/W, you cannot adjust front/rear

speaker balance. Refer to Setting the rear output

and subwoofer controller on page 49.

4 Push MULTI-CONTROL left or right to

adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or

right, the left/right speaker balance moves to-

wards the left or right.

L15to R15is displayed as the left/right

speaker balance moves from lef t to right.

Using the equalizer

The equalizer lets you adjust the equalization

to match the car’s interior acoustic character-

istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Audio Adjustments

En

44

Section

03

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

Commentaires sur ces manuels

Pas de commentaire