Pioneer SC-LX79 Manuel d'utilisateur télécharger pdf (Page 117)

117

The System Setup and Other Setup menus

3 Select the Volume Level setting you want.

! Variable (default) – Adjusts the sound volume of the sub zone using this unit.

! –40 dB Fixed/0 dB Fixed – The Zone 2/Zone 3 volume level output from the receiver is fixed to the value set

here.

4 Select the Power ON Level setting you want.

Sets the sound volume of the sub zone when the multi-zone function is used to turn on the sub zone. Volume can

be set for ZONE 2, ZONE 3, and HDZONE, respectively.

When Volume Level is set to –40 dB Fixed or 0 dB Fixed, the volume is fixed to that level, so the volume cannot

be set here.

! LAST (default) – When MULTI-ZONE is turned on, the volume is set to the level set the last time you were

listening to that zone.

! “---” – When MULTI-ZONE is turned on, the volume for that zone is set to the minimum.

! –80.0dB to 0dB – When MULTI-ZONE is turned on, the volume is set to the level set here. The volume can be

set up to the value set at Volume Limit below.

5 Select the Volume Limit setting you want.

The maximum volume for the zone selected in step 2 can be set.

! OFF (default) – The maximum volume is not limited.

! –20.0dB/–10.0dB – The maximum volume is limited to the value set here.

6 Select the Mute Level setting you want.

The mute level for the zone selected in step 2 can be set.

This sets how much the volume is to be turned down when MUTE is pressed.

! FULL (default) – No sound.

! –40.0dB/–20.0dB – The volume will be turned down to the level specified here.

7 Adjust Lch Level and Rch Level.

The channel level for the zone selected in step 2 can be set.

The level can be adjusted between –12.0dB and +12.0dB, in 1 dB steps.

8 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Multi Channel Input Setup

SC-LX89 only

You can adjust the level of the subwoofer for a multi-channel input. Also, when the multi-channel input is

selected as an input function, you can display the video images of other input functions. In the Multi Channel

Input Setup, you can assign a video input to the multi-channel input.

1 Select ‘Multi Ch In Setup’ from the Other Setup menu.

2 Select the ‘SW Input Gain’ setting you want.

! 0dB – Outputs sound of the subwoofer at the level originally recorded on the source.

! +10dB – Outputs sound of the subwoofer at the level increased by 10 dB.

3 Select the ‘Video Input’ setting you want.

When the multi-channel input is selected as an input function, you can display the video images of other input

functions. The video input can be selected from the following: SAT/CBL, DVR/BDR, OFF.

4 When you’re finished, press RETURN.

You will return to the Other Setup menu.

Maintenance Mode

Only use this if so instructed by a Pioneer service engineer or custom installer.

Making network settings using Safari

1 Launch Safari on your computer.

2 Press Bookmark icon. Click Bonjour list (a), and then select this receiver’s name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP address“http://(the receiver’s IP address)” from Safari.

(Model No.)

3 On the AVNavigator menu screen, select Network Setup.

4 Click Network Configuration.

5 Setup the network settings manually and then press Apply.

Note

This setting for the network has been confirmed for OS X v 10.7 and Safari 5.1.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 150 151

Commentaires sur ces manuels

Pas de commentaire

Pioneer SC-LX79 Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer SC-LX79