Pioneer X1 Guide d'installation Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 194
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
DIN Rear-mount
Installation using the screw holes on the
side of the display unit
Fastening the display unit to the
factory radio-mounting bracket.
Select a position where the screw holes
of the bracket and the screw holes of
the display unit become aligned (are
fitted), and tighten the screws at 2
places on each side. Use any of screws
(4 × 3 mm), binding screws (5 × 6
mm) or flush surface screws (5 × 6
mm), depending on the shape of the
screw holes in the bracket.
*1 Use screws (4 × 3 mm) only.
When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Fixing the front panel
If you do not operate the removing and
attaching the front panel function, use
the supplied fixing screws to fix the
front panel to the display unit.
Fix the front panel to the display
unit using the fixing screws after
removing the frame.
Fixing screw
Fixing screw
Front panel
Binding screw
(5 × 6mm)
Dashboard or
Console
Factory radio mounting
bracket
Display unit
*
1
*
1
Conceal tape
*
1
*
1
Display unit
26
English
Español
Deutsch
Français
Italiano
Nederlands
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 193 194

Commentaires sur ces manuels

Pas de commentaire