Pioneer S-21W Manuel d'utilisateur télécharger pdf (Page 11)

English Français Deutsch

Nederlands

Italiano Español

Pyccкий

11

En

• These speaker terminals carry

HAZARDOUS LIVE voltage. To prevent the

risk of electric shock when connecting or

disconnecting the speaker cords,

disconnect the power cord before touching

any uninsulated parts.

• After connecting the plugs, pull lightly on

the cords to make sure that the ends of the

cords are securely connected to the

terminals. Poor connections can create

noise and interruptions in the sound.

• If the cords’ wires happen to be pushed out

of the terminals, allowing the wires to come

into contact with each other, it places an

excessive additional load on the receiver.

This may cause the amp to stop

functioning, and may even damage the

receiver.

• When using a set of speakers connected to

an receiver, you won’t be able to obtain the

normal stereo effect if the polarity (+, –) of

one of the speakers (left or right) is

reversed.

Operation

• Set the receiver’s cross-over frequency

at 200 Hz.

Wall-mounting the front

and surround speaker

system

Attaching the brackets

• When attaching the speakers to brackets,

always use the furnished brackets for wall

mounting.

• Make sure to tighten the supplied screw as

securely as possible when attaching the

bracket to the back of the speaker.

• Do not attach brackets to center speaker or

subwoofer.

• Use the M5 metric thread screw. Do not

use inch thread screw.

Before mounting

• Remember that the speaker system is

heavy and that its weight could cause the

wood screws to work loose, or the wall

material to fail to support it, resulting in the

speaker falling. Make sure that the wall on

which you intend to mount the speakers is

strong enough to support them. Do not

mount on plywood or soft surface walls.

• Mounting screws are not supplied. Use

screws suitable for the wall material and

support the weight of the speaker. If you are

unsure of the qualities and strength of the

walls, consult a professional for advice.

Screw (supplied)

5 mm (3/16 in.) to 7 mm (9/32 in.)

Mounting screw (not supplied)

5 mm

(3/16 in.)

10 mm

(13/32 in.)

01_S-21W&S-11.book 11 ページ２０１０年３月１６日　火曜日　午前１１時２８分

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 111 112

Commentaires sur ces manuels

Pas de commentaire