Pioneer PDP-5020FD Manuel d'utilisateur télécharger pdf (Page 117)

117

Helpful Information

English

Home Media Gallery/NETWORK

Issue Possible Solutions

No servers are found.

No previously

connected server(s)

found (items in Select

Servers are dimmed).

“Failed to acquire a

list.” appears on the

Server List screen.

• Confirm that the PC is On and not in Standby or Sleep. (nothing is chosen in Select

Servers). When the PC started from “Wake On LAN” (WOL), check if the PC complies

with WOL or if the WOL setup is programmed properly in device manager for BIOS or

Windows.

• Check the physical connections (hub, router, and cable quality). Please use 100BASE-

TX for best quality playback and display speed.

• Check the logical connections (IP Address setup, DHCP, etc.). Confirm the IP Address

is correct if acquired by Auto IP and Firewall setup. Also check if the IP Address is

properly acquired with DHCP on the Network Setup screen that follows the HMG Setup

menu.

• Using two or more application servers on a single PC may cause unstable operation.

For proper operation, it is strongly recommended that one application server is used on a

single PC.

• Check the PC if its media server is running. Restart if necessary. Check if one or more

servers are On (this may cause a malfunction).

• Check if the PC is operating properly. Reboot the PC after confirming specifications

and setup values.

• Check the media server setup. If a client is registered manually, the setup procedure

may have to be run again. An option “Not Allowed” may be selected for connections.

• Check if UPnP (Universal Plug and Play) is enabled on your router. Refer to your

router’s instruction manual for procedures.

• Wait for a short period then select “Update Server List” from the TOOLS Menu.

• Check for radio interference when connected using a wireless LAN. Radio interference

may cause the connection to fail.

• If the above does not solve the problem, try turning TV a off on the remote control unit

then turn a on on the flat panel TV.

An available server is

selected but cannot be

navigated.

• Check if the server is correctly set up for file sharing, if the target folder has been

deleted, or if one or more folders have been corrupted on the server.

• Check if there are too many files in each folder.

A server is arbitrarily

selected.

• This arbitrary selection happens when the server you used before had been set to

display the Media Navigator menu screen (if you reset it, other servers connected are

also reset).

•When ON is selected for Auto Connection on the HMG Setup menu, the server is

automatically accessed if only one server is connected. Use the TOOLS Menu to select

the proper server.

File/folder

configuration differs

from one server to

another (strange

configuration).

• The Media Navigator displays the server contents as classified by the server.

• If no information (such as ID3 tag) is contained in the file, files cannot be classified on

the server.

A communication error

message appears.

• Refer to the possible solutions provided previously for “No servers are found.”

• If the above does not solve the problem, try turning TV a off on the remote control then

turn on the flat panel TV’s a.

PDP6020FD.book Page 117 Monday, March 17, 2008 10:51 AM

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 154 155

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-5020FD Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour TV LCD Pioneer PDP-5020FD