Pioneer VSX-AX3-S Manuel d'utilisateur télécharger pdf (Page 40)

Setting Up for Surround Sound

1 SPEAKER SETTING should be selected. If

it isn’t use the  buttons to select it.

Press the ENTER button.

The setup possibilities appear on your TV.

2 With the  buttons choose the

speakers that you want to set. Press the

ENTER button.

The setup possibilities appear on your TV.

3 Use the  buttons to choose the

number (YES or NO, X1 or X2) and the

size (LARGE or SMALL) for each set of

speakers. Press ENTER.

PLUS is also a possibility for the SUBWOOFER.

4 Repeat steps 2 and 3 for all speakers

channels.

5 Use the  buttons to select EXIT and

press ENTER.

Next, proceed to CHANNEL LEVEL below.

If you want to change a setting before proceeding start

over from step 1.

Memo:

If you have a subwoofer and like lots of bass, it may seem logical

to select LARGE for your front speakers and leave the subwoofer

selected. This may not, however, yield the best bass results.

Depending on the size and shape of your room you may actually

experience a decrease in the amount of bass due to what is

called low frequency cancellations. If you have a subwoofer, listen

to the bass response with the front speakers set to LARGE and

SMALL alternately and let your ears judge which sounds best.

The safest option is to route all the bass sounds to the subwoofer

by selecting SMALL for the front speakers.

(THX Speaker:SMALL)

1-5

00_VSX-AX3.book Page 40 Monday, May 19, 2003 1:05 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 103 104

Pas de commentaire

Pioneer VSX-AX3-S Manuel d'utilisateur Page 40