English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
16
Installing the hide-away unit
Mounting with Brackets
Fig. 12
Mounting with Hook and Loop Fastner
Thoroughly wipe off the surface before
affixing the hook and loop fastner.
Fig. 13
DIN Front/Rear-mount
This unit can be properly installed
either from “Front” (conventional DIN
Front-mount) or “Rear” (DIN Rear-
mount installation, utilizing threaded
screw holes at the sides of unit chas-
sis). For details, refer to the following
illustrated installation methods.
Before installing the unit
• Remove the mounting sleeve.
(Fig. 14)
Loosen the screws (2 mm × 3 mm)
and then remove the mounting sleeve.
Fig. 14
DIN Front-mount
Installation with the rubber bush
1. Decide the position of the side
brackets. (Fig. 15)
When installing in a shallow space,
change the position of side brackets. In
this case, stick concealing tape on
parts that protrude from the dashboard.
Fig. 15
Commentaires sur ces manuels