Pioneer BDP-51 Fiche technique télécharger pdf (Page 52)

Picture is stretched.

Aspect ratio cannot be

switched.

Is the TV’s aspect ratio properly set? Read the TV’s operating instructions and set the TV’s aspect

ratio properly.

Is 4:3 Video Out properly set? • Set 4:3 Video Out properly (page 41).

• When video signals with a resolution of 1080/50i, 1080/50p,

720/50p, 1080/24p, 1080/60i, 1080/60p or 720/60p are being

output from the HDMI OUT terminal or the COMPONENT

VIDEO output terminals, they may be output with an aspect

ratio of 16:9 even if TV Aspect Ratio is set to 4:3 (Standard)

(page 24).

Sound and picture are not

synchronized.

Is Output Terminal Priority properly set? Set Output Terminal Priority properly (pages 19 and 49).

Picture is disturbed during

playback.

Picture is dark.

• This player supports Macrovision analog copy protection

technology. With some TVs (such as with built-in video deck),

the picture will not be displayed properly when the copy

protected DVD title is played. This is not a malfunction.

• If the player and TV are connected via a DVD recorder/video

deck, etc., the picture will not be displayed properly due to

analog copy protection. Connect the player and TV directly.

No picture is displayed or

picture is not output in high

definition when playing BDs.

With some content protected discs, it may not be possible to

output the video signals from the VIDEO output terminals, the

S-VIDEO output terminal or the COMPONENT VIDEO output

terminals. In this case, connect using an HDMI cable

(page 13).

No sound is output.

Sound is disturbed.

Is the disc played back in slow motion?

Is the disc played back in fast forward or fast reverse?

No sound is output during slow motion play and forward and

reverse scanning.

Is the disc scratched? The sound may not be output if the disc is scratched.

Is the disc dirty? Clean the disc (page 60).

Is the player properly connected to the other components (AV

receiver or amplifier, etc.)?

• Check that you connect the player to the audio output

terminals of a different component, etc.

• Check that you connect the player to the PHONO input

terminals of the AV receiver or amplifier, etc.

Are the connected components (AV receiver or amplifier, etc.)

properly set?

Read the operating instructions of the connected components

and check the volume, input, speaker settings, etc.

Are the audio cables properly connected? Insert the cables firmly and all the way in.

Is the audio cable damaged? If the cable is damaged, replace it with a new one.

Is the player connected to the TV using an HDMI cable to watch

the picture?

When connecting using component video cables, an S-Video

cable or a video cable to watch the picture, it is not possible to

listen to the sound of devices connected with HDMI cables.

Take one of the measures below (pages 13 and 16).

– To watch the picture on a device that is not HDMI

compatible, connect using either an optical digital audio

cable, coaxial digital audio cable or analog audio cables

(7.1 or 2 channels) to listen to the sound.

– To listen to the sound on an HDMI-compatible device,

connect to the TV using an HDMI cable to watch the

picture.

After one of the above measures, use Setup Navigator to reset

the player (page 19).

Is Audio Output Mode properly set? If Audio Output Mode is set to Multi-channel, the audio

signals may not be output properly from the AUDIO OUT (2

ch) terminals (page 41). Set Audio Output Mode to 2

Channel.

Are the speakers properly set? Set Speaker Setup properly (page 41).

For some BDs, audio signals are only output from the DIGITAL

OUT (COAXIAL/OPTICAL) terminal or the HDMI OUT

terminal.

Problem Check Remedy

51FD_WV_EN.book 52 ページ２００８年８月２６日　火曜日　午前９時５８分

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-51 Fiche technique Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer BDP-51