Pioneer BDP-51 Fiche technique télécharger pdf (Page 38)

Chapter 5

Adjusting audio and video

Adjusting the video

The quality of the playback picture can be adjusted according to the

TV you are using.

1 During playback, press VIDEO ADJUST to display the Video

Adjust screen.

The Video Adjust screen can also be displayed by selecting Video

Adjust from the TOOLS menu.

2 Select a preset.

Select using / according to the TV being used.

• LCD – Select this when connected to a liquid crystal display TV.

• PDP – Select this when connected to a plasma TV of another

brand.

• Pioneer PDP – Select this when connected to a Pioneer plasma

TV.

• Projector – Select this when connected to a front projector.

• Professional – With this setting, video signal processing is

restrained. Select this when connected to a professional

monitor.

• Memory1 to 3 – Picture quality settings with adjusted

parameters can be stored in the memory. For a description of

the parameters, see When Memory1, 2 or 3 is selected below.

 When Memory1, 2 or 3 is selected

1 Select Adjustments.

Use  to select Adjustments, then press ENTER.

A detailed settings screen appears.

2 Select the item to be adjusted.

Use / to select.

3 Adjust the picture quality.

When / are pressed, the adjustments can be made watching

the picture. The detailed settings screen reappears when ENTER is

pressed.

• Prog.Motion – Adjust according to the type of image (movie or

still image). This is effective when outputting video materials as

progressive images.

• Pure Cinema – This setting optimizes the operation of the

progressive scanning circuit for playing film materials. Normally

set it to Auto1. If the picture seems unnatural, switch this to

Auto 2, On or Off (page 39).

• YNR – Reduces noise in the luminance (Y) signal.

• CNR – Reduces noise in the chroma (C) signal.

• BNR – Reduces the block noise (block-shaped distortion

generated upon MPEG compression).

• MNR – Reduces the mosquito noise (distortion along the

contours of the picture generated upon MPEG compression).

• Detail – Emphasizes the picture’s contours.

• White Level – Adjusts the level of the white portions.

• Black Level – Adjusts the level of the black portions.

• Black Setup – Select the black level as the setup level. Normally

select 0 IRE. If the black is too dense and all the dark colors are

displayed in a uniform black due to the combination with the

connected monitor, select 7.5 IRE.

• Gamma Correction – Adjusts how the dark portions of the

picture look.

• Hue – Adjusts the balance between green and red.

• Chroma Level – Adjusts the density of the colors.

Note

• Prog.Motion and Pure Cinema have the effect only for pictures

recorded in the interlaced scan format (576i/480i or 1080i

signals).

• Prog.Motion is disabled when Pure Cinema is set to On.

• Bl

k Setup have the effect only for pictures output from the

VIDEO and S-VIDEO output terminals, and for NTSC signals

output.

• YNR, CNR, BNR and MNR are disabled when 1080/24p signals

are output from the HDMI OUT terminal.

RED

GREEN

YELLOW BLUE

VIDEO ADJUST

TOP MENU

TOOLS

HOME

RETURN

ENTER

Adjustments

Video Adjust

PDP

Prog. Motion

Pure Cinema

YNR

CNR

BNR

MNR

Video Adjust [ Memory1 ]

Use [ ][ ] to adjust the picture to progressive scan.

Motion Still

Auto1

Off Max

1/2 P

age

Motion Still

Prog. Motion

51FD_WV_EN.book 38 ページ２００８年８月２６日　火曜日　午前９時５８分

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-51 Fiche technique Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer BDP-51