Pioneer VSA-AX10 Manuel d'utilisateur télécharger pdf (Page 109)

109

En

Techno Tidbits & Problem-solving

EXPERT

• Make sure the component is connected

correctly (p.19-21).

• Select the correct function.

• Please read the TV monitor manual and

change the settings accordingly.

• Select the correct COMPONENT VIDEO

IN setting (p.86).

• Use a component video cord to connect

to the TV as well (see p.18).

• Connect the source component to either

the composite video, or the S video jacks

(p.18).

• You can't record sources that have been

copy protected.

• Press DISPLAY DIMMER on the remote

control repeatedly to return to the default

setting (p.64).

• Switch DIRECT FUNCTION to ON (p.71).

• Make sure the digital connections and

the DIGITAL IN setting (p.85) is done

correctly.

• Press the TAPE 2 MONITOR button so it

goes into the off setting (p.62).

• Turn MULTI CH IN mode off (p.61).

• Select the correct input function or set

the i.LINK input correctly (p.87).

• Play the source.

• Fix the audio settings (check the manual

that came with your DVD player).

• There is no problem. The indicator won't

light when the track is not a compressed

digital source.

• Choose DIGITAL or AUTO with the signal

select button (p.52).

• This is not a malfunction. Check the

manufacturer information for the source.

• Switch the LISTENING CH SELECT to

7.1 and switch to the THX Surround EX or

Standard TX listening mode (p.50-51).

Problem Cause Remedy

No image is output when an

input is selected.

After connecting the TV and

selecting the proper video

input, there is still no image.

There is no image coming

from the selected component

video jacks.

Can't record video.

Input/display

The display is dark.

You can’t change the device

input even when you press

the function key on the

remote.

You can't get DIGITAL or 2

RF to come up when using

the SIGNAL SELECT button.

The digital format indicator

doesn't light up even when

playing a non-PCM digital

source.

A compressed digital source

is being played, but the

digital format indicators

don't light up.

During playback of a

compressed digital source,

the 2 PRO LOGIC or NEO:6

indicators show in the

display.

During playback of a

Surround EX or DTS ES

source on the AUTO setting,

the EX and ES indicators

won't light.

• Improper connections.

• The input source on the TV monitor is

not properly selected.

• The video input selected on the TV

monitor is incorrect.

• The COMPONENT VIDEO IN setting is

incorrect.

• The cord connect to the TV is composite

or S video.

• You are trying to record a source

connected to the component video jacks.

• The source is copy protected.

• The DISPLAY DIMMER button is pushed.

• DIRECT FUNCTION is set to OFF.

• Either the digital connections or the

DIGITAL IN setting is incorrect.

• TAPE 2 MONITOR is on.

• MULTI CH IN mode is on.

• You’re in an unassigned i.LINK function.

• The player is paused or stopped.

• There is a mistake in the player settings

for audio output.

• Although it's a non-PCM digital source

there is a possibility the present track is not

the proper format (5.1, 6.1, or 7.1 channel).

• The digital signal is not being sent with

the source.

• The audio is in two channel format.

• It has already been Dolby surround

encoded.

• The source may be 6.1 playback

compatible, but there is no signal from the

source to indicate this.

1 2 ... 104 105 106 107 108 109 110 111 112

Commentaires sur ces manuels

Pas de commentaire