Pioneer PDP-507XD Manuel d'utilisateur télécharger pdf (Page 43)

Enjoying DTV broadcasts

English

Selecting languages for audio, subtitles,

and teletext

You may manually configure language settings for audio,

subtitles, and teletext.

1 Repeat steps 1 to 4 provided for “Selecting a digital audio

format”.

2 Select “Language Settings” ( / then ENTER).

3 Select “Primary Audio”, “Secondary Audio”, “Primary

Subtitle”, “Secondary Subtitle” or “Teletext” ( / ).

4 Select a language ( / ).

NOTE

• The Plasma Television automatically selects the language

based on the “Country” setting (page 28) when the selected

language for audio, subtitle, or teletext is not available.

• You can select “DTV Setup” only when watching DTV

channels.

Using Software Update

This function downloads and updates the system’s software at

the specified timing.

Using Auto Update

With this function on, the Plasma Television checks if updated

software is available and then downloads it (as necessary).

After this, the system executes Add New Channels operation

(page 39). This series of operations are automatically executed

at the specified time.

1 Press HOME MENU.

2 Select “Setup” ( / then ENTER).

3 Select “DTV Setup” ( / then ENTER).

4 Select “Software Update” ( / then ENTER).

5 Select “Auto Update” ( / ).

6 Select “On” ( / ).

NOTE

• We recommend that you normally select “On”.

• For Auto Update to start, there must be more than 1 hour left

to the start of the next preset recording/watching.

• 60 seconds before the scheduled update, a message prompt

appears asking if you want to carry out Auto Update or not.

Auto Update automatically starts if “OK” is selected or no

selection is made after 50 seconds.

• To quit an update in progress, press HOME MENU.

• You can select “DTV Setup” only when watching DTV

channels.

Setting Update Time

You can set the time your Plasma Television performs Auto

Update each day. To use this function, set “Auto Update” to

“On” first.

1 Repeat steps 1 to 4 provided for “Using Auto Update”.

2 Select “Set Update Time” ( / then ENTER).

3 Set a time for Auto Update (/// or 0 to 9).

Starting Manual Update

This function allows you to manually execute Software Update.

If less than 1 hour is left to the next scheduled Auto Update or

programmed recording/watching, Manual Update cannot be

executed.

1 Repeat steps 1 to 4 provided for “Using Auto Update”.

2 Select “Start Manual Update” ( / then ENTER).

NOTE

• For Manual Update to start, there must be more than 1 hour

left to the start of the next preset recording/watching.

• For Manual Update to start, there must be more than 1 hour

left to the start of Auto Update.

• You can select “DTV Setup” only when watching DTV

channels.

Software Update

Set Update Time

Start Manual Update

Auto Update

Technical Information

Set Update Time

Time

11 32

PDP507XDE.book Page 43 Friday, June 2, 2006 3:07 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 217 218

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-507XD Manuel d'utilisateur Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Pioneer PDP-507XD