Pioneer PDP-507XD Manuel d'utilisateur télécharger pdf (Page 36)

Basic Adjustment Settings

Listening to audio from the sub screen

using headphones

With headphones connected, you can listen to audio coming

from the sub screen when in the 2-screen or picture-in-picture

mode; audio coming from the main screen is output from the

speakers. To use this function, follow the procedure below.

1 Press HOME MENU.

2 Select “Sound” ( / then ENTER).

3 Select “Headphone Output” ( / ).

4 Select the desired parameter ( / ).

5 Select “Sub Volume” ( / ).

6 Select the desired volume level ( / ).

7 Press HOME MENU to exit the menu.

NOTE

• To adjust the volume for headphones after selecting “Sub”,

always use the menu item (shown in the procedure) no

matter whether the screen is in the single, 2-screen, or

picture-in-picture mode. When the screen is in the single

mode with “Sub” selected, audio coming from the screen is

output from speakers even with headphones connected.

• Audio from a connected subwoofer is muted when you have

selected “Sub” for “Headphone Output” and connected

headphones.

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You may use one of the three Energy Save modes to save power

consumption.

1 Press HOME MENU.

2 Select “Power Control” ( / then ENTER).

3 Select “Energy Save” ( / then ENTER).

4 Select “Save 1”,”Save 2”, or “Picture Off” ( / then

ENTER).

5 Press HOME MENU to exit the menu.

NOTE

• You can also select this function using the Home menu

when the input source is a PC.

• When you change the Energy Save mode, you may notice a

change in the panel sound. This is normal.

No Signal off (AV mode only)

The system will be automatically placed into the standby mode

if no signal is received for 15 minutes.

1 Press HOME MENU.

2 Select “Power Control” ( / then ENTER).

3 Select “No Signal off” ( / then ENTER).

4 Select ”Enable” ( / then ENTER).

5 Press HOME MENU to exit the menu.

NOTE

• Five minutes before the system is placed into the standby

mode, a message appears every minute.

• The system may not be placed into the standby mode when

noise signals are present at the Plasma Television after a TV

programme finishes.

Item Description

Main

(factory default)

Audio coming from the main screen is output

from the PHONES output terminal.

Sub

When in the 2-screen or picture-in-picture mode,

audio coming from the sub screen is output

from the PHONES output terminal.

Front Surround

Headphone Output

Sub Volume

Off

Main

Front Surround

Headphone Output

Sub Volume

Off

Sub

Item Description

Standard Does not decrease the picture brightness.

Save1 Slightly lowers power consumption while

slightly suppressing the brightness drop level.

Save2 Decreases the picture brightness and lowers

power consumption.

Picture Off Deactivates the screen to save power. To restore

the screen display, press any button other than

i +/i – and e.

This setting is not memorized by the system.

Item Description

Disable

(factory default)

Does not place the system into the standby

mode.

Enable Places the system into the standby mode if no

signal is received for 15 minutes.

PDP507XDE.book Page 36 Friday, June 2, 2006 3:07 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 217 218

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-507XD Manuel d'utilisateur Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Pioneer PDP-507XD