Pioneer PDP-507XD Manuel d'utilisateur télécharger pdf (Page 44)

Enjoying DTV broadcasts

Displaying technical information

Use this function to check the hardware/software version

number.

1 Repeat steps 1 to 4 provided for “Using Auto Update”.

2 Select “Technical Information” ( / then ENTER).

NOTE

• You can select “DTV Setup” only when watching DTV

channels.

Using MHEG application (UK only)

Some stations bring you programmes with the MHEG

(Multimedia and Hypermedia Expert Group) application

encoded, letting you experience DTV interactively.

When provided, the MHEG application will start when you

press any of the colour buttons or m.

NOTE

• This function is not available when subtitle is activated (see

page 38).

Screen Saver

The screen saver automatically starts when no operation is

performed for 3 minutes while receiving DTV radio channels.

NOTE

• While the screen saver is active, you can perform the

following operations:

•Press TV/DTV to switch to analogue TV.

• Press any other button to switch to the normal radio

channel screen.

• Programme Timer is active while the screen saver is

displayed.

Common Interface

To receive scrambled DTV signals you will need a CA module

and a smart card provided by the service provider.

Although CA module types may vary depending on the

manufacturer, each one of the CA modules supports a certain

kind of encryption system. Your Plasma Television supports CA

modules which are made to work with the DVB standard.

Contact a service provider for the right type of CA module.

Please note that a smart card may only be valid for a single

service provider and due to this, a specific range of channels.

NOTE

• CA modules and smart cards are neither supplied nor

optional accessories from PIONEER.

After inserting a card, leave it in the slot permanently. Do not

remove it from the terminal unless asked to do so. For instance,

your card has to be in the slot when your service provider wants

to download new information to the smart card.

Installing a CA module and smart card

Common Interface slot is located at the rear of the Plasma

Television.

1 Hold and push the tab of the slot cover on the rear of the

Plasma Television leftward (a), and remove the cover while

pulling the tab’s latch downward (b).

2 Insert the specified CA module containing a smart card

into the Common Interface slot as far as it will go.

Displaying information about the installed CA

module

If you have installed a CA module in the Common Interface

slot, you can display information about the CA module.

1 Press HOME MENU.

2 Press “Setup” ( / then ENTER).

3 Select “DTV Setup” ( / then ENTER).

4 Select “DVB-CI Information” ( / then ENTER).

(If there is no CA module installed, the “DVB-CI

Information” option is greyed out.)

Tab

COMMON INTER

CA module

Smart card

PDP507XDE.book Page 44 Friday, June 2, 2006 3:07 PM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 217 218

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-507XD Manuel d'utilisateur Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions Pioneer PDP-507XD