Pioneer VSX1017TXV Manuel d'utilisateur télécharger pdf (Page 53)

Other Settings

Assigning the HDMI inputs

• Default settings:

HDMI - 1

–

DVD/LD

HDMI - 2

–

TV/SAT

You only need to change this setting when you didn’t

connect your HDMI component according to the default

settings for the HDMI input terminals (see above). By

specifying the type of the connected component and to

which input terminal it is connected, video signals can be

delivered properly when you select an HDMI component

as the input source.

1 Select ‘HDMI Input’ from the Input Assign menu.

2 Select the number of the HDMI input to which

you’ve connected your video component.

The numbers correspond with the numbers beside the

inputs on the back of the receiver.

3 Select the component that corresponds with the

one you connected to that input.

Select between

DVD/LD

TV/SAT

DVR 1

DVR 2

OFF

• Use

/

and

ENTER

to do this.

• To hear audio from your HDMI component (through

this system), you must also make separate audio

connections to the corresponding inputs on the rear

of the receiver. For more on this, see

Using SIRIUS

Radio

on page 46.

• If you connect any video component to the receiver

using HDMI, you should also have your TV connected

to this receiver’s HDMI output.

4 When you're finished, press RETURN.

You return to the Input Assign menu.

The Other Setup menu

The Other Setup menu is where you can make

customized settings to reflect how you are using the

receiver.

1 Press

RECEIVER

on the remote control, then press

the

SETUP

button.

An on-screen display (OSD) appears on your TV. Use

/

//

and

ENTER

to navigate through the screens

and select menu items. Press

RETURN

to confirm and

exit the current menu.

2 Select ‘Other Setup’ then press

ENTER

3 Select the setting you want to adjust.

If you are doing this for the first time, you may want to

adjust these settings in order:

•

DRC Setup

– Specify the amount of dynamic range

adjustment to Dolby Digital or DTS soundtracks (see

Dynamic Range Control Setup

below).

•

Dual Mono Setup

– Isolate one channel when

listening to discs with dual mono encoding (see

Dual

Mono Setup

below).

•

LFE ATT Setup

– Choose the attenuator level for the

LFE channel (

LFE Attenuator Setup

on page 54).

•

SR+ Setup

– Specify how you want to control your

Pioneer plasma display (

SR+ Setup for Pioneer

plasma displays

on page 54).

•

Video Conv. Setup

– Specify if you want analog

video signals converted for output to your TV (

Video

Converter Setup

on page 54).

4 Make the adjustments necessary for each setting,

pressing RETURN to confirm after each screen.

Dynamic Range Control Setup

• Default setting:

OFF

This setting specifies the amount of dynamic range

adjustment to Dolby Digital and DTS movie soundtracks.

You may want to use this when listening to surround

sound at low volumes.

1 Select ‘DRC Setup’ from the Other Setup menu.

2 Choose the setting that you want.

•

OFF

– No dynamic range adjustment (use when

listening at higher volume).

•

MID

– Mid setting.

•

MAX

– Dynamic range is reduced (loud sounds are

reduced in volume while quieter sounds are

increased).

3 When you're finished, press

RETURN

You return to the Other Setup menu.

Dual Mono Setup

• Default setting:

CH1

You can specify how dual mono encoded Dolby Digital

and DTS soundtracks should be played. Dual mono is not

widely used, but is sometimes necessary when two

languages need to be sent to separate channels.

5. Input Assign

:Return

a.Digital Input

b.Component Input

c.HDMI Input

5c.HDMI Input

:Finish

HDMI - 1 DVD/LD

HDMI - 2 [ TV/SAT ]

System Setup

1.Surr Back System

2.Auto MCACC

3.Manual MCACC

4.Manual SP Setup

5.Input Assign

6.Other Setup

: Exit

6.Other Setup

:Return

a.DRC Setup

b.Dual Mono Setup

c.LFE ATT Setup

d.SR

Setup

e.Video Conv. Setup

6.Other Setup

:Return

a.DRC Setup

b.Dual Mono Setup

c.LFE ATT Setup

d.SR

Setup

e.Video Conv. Setup

DRC OFF

6a.Dynamic Range Control

:Finish

VSX-1017TXV_KU.book 53 ページ２００７年４月１２日　木曜日　午前１１時３２分

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX1017TXV Manuel d'utilisateur Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX1017TXV