Pioneer VSX1017TXV Manuel d'utilisateur télécharger pdf (Page 56)

Using other functions

Dimming the display

You can choose between four brightness levels for the

front panel display. Note that when selecting sources, the

display automatically brightens for a few seconds.

• Press

RECEIVER

then press DIMMER repeatedly to

change the brightness of the front panel display.

Switching the speaker impedance

We recommend using speakers of 8

Ω

with this system,

but it is possible to switch the impedance setting if you

plan to use speakers with a 6

Ω

impedance rating. Use

the front panel controls to do this.

• With the receiver in standby, press



STANDBY/

while holding down the

SPEAKERS

button.

Each time you do this, you switch between the

impedance settings:

•

SP 6 OHM

– Use this setting if your speakers are

rated at 6

Ω

•

SP 8 OHM

– Use this setting if your speakers are

rated at 8

Ω

or more.

Resetting the system

Use this procedure to reset all the receiver’s settings to

the factory default. Use the front panel controls to do this.

1 Switch the receiver into standby.

2 While holding down the front panel

TONE

button,

press and hold



STANDBY/ON for about three

seconds.

The display shows

RESET?

3 Press the front panel

ENTER

button.

The display shows

RESET OK?

4 Press

SYSTEM SETUP

to confirm.

appears in the display to indicate that the receiver

has been reset to the factory default settings.

• Note that all settings will be saved, even if the

receiver is unplugged.

ANALOG

AT T

MIDNIGHT/

LOUDNESS

DIMMER

SLEEP SB ch

SR+

DACCESS

DIALOG E PHASE

S.RETRIEVER

RECEIVER

TUNERiPod

CD-R/TAPE

VSX-1017TXV_KU.book 56 ページ２００７年４月１２日　木曜日　午前１１時３２分

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 73 74

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX1017TXV Manuel d'utilisateur Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX1017TXV