Pioneer PDP-501MX Manuel d'utilisateur télécharger pdf (Page 52)

52 THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

Wall side

Insert the monitor-

fastening bolt into

opening in the

wall-suspension

hardware and

lower it into the

cutout.

Tighten the screw from above

to keep the bolt from working

loose.

Display

Tighten the nut.

2.After performing the above step, adjust the installation angle, as discussed on the next page.

3Mounting the plasma display

1.Two persons should firmly hold the left and right sides of the plasma display, as shown. Insert four monitor-

fastening bolts into appropriate openings in the wall-suspension hardware. Insert the two lower bolts before the

upper two.

2.After mounting the mounting hardware to the wall with the screws, fully extend the left and right vertical frames

as shown and tighten the left and right screws (c).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 114 115

Pas de commentaire

Pioneer PDP-501MX Manuel d'utilisateur Page 52